PartsTable
Technical Data Sheet
PartsTable / COMPONENT / IMD-100-5
IMD-100-5 ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

ADAPTER,STRAIGHT,FLANGE TO TUBE. Key specifications include material: STEEL CORROSION RESISTING FILTERING MEDIUM, mesh_size: 325.0, wire_diameter: 0.00140 INCHES NOMINAL IN, surface_treatment: PASSIVATE SCREENING, fsc_application_data: FUEL CONTROL,ENGINE,ACFT, filtering_media_design: MESH SINGLE FILTERING MEDIA RESPONSE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-464-1780, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
IMD-100-5
NSN: 4730-01-464-1780
FSC: 4730
CAGE: 28953 — RIX INDUSTRIES (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING FILTERING MEDIUM
mesh_size325.0
wire_diameter0.00140 INCHES NOMINAL IN
special_featuresFLOW RATE: INBOARD SCREEN-10GPM, OUTBOARD SCREEN-8GPM; CLEAN PRESSURE DROP AT RATED FLOW: INBOARD SCREEN-2 PSID, OUTBOARD SCREENS-35 PSID
surface_treatmentPASSIVATE SCREENING
fsc_application_dataFUEL CONTROL,ENGINE,ACFT
filtering_media_designMESH SINGLE FILTERING MEDIA RESPONSE
NSN4730-01-464-1780
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: IMD-100-5 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
IMD-100-5Interchangeable
interchangeable cross-reference
interchangeable
RIX IMD-60 APLInterchangeable
interchangeable cross-reference
interchangeable
54-2694Interchangeable
interchangeable cross-reference
interchangeable
IMD-60 APLInterchangeable
Same NIIN cross-reference
interchangeable
IMD-100-6Interchangeable
Same NIIN cross-reference
interchangeable
54P-12F5050SSInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy IMD-100-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is IMD-100-5?
IMD-100-5 is a ADAPTER,STRAIGHT,FLANGE TO TUBE.
What parts can replace IMD-100-5?
There are 6 known substitutes for IMD-100-5: IMD-100-5, RIX IMD-60 APL, 54-2694 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for IMD-100-5?
IMD-100-5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-464-1780. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — IMD-100-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026