PartsTable
Technical Data Sheet
PartsTable / COMPONENT / IM880PC20
IM880PC20 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.656 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, outside_diameter: 14.750 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 11.437 INCHES NOMINAL IN, bolt_hole_quantity: 12, bolt_circle_diameter: 13.250 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-080-2929, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
IM880PC20
NSN: 5330-01-080-2929
FSC: 5330
CAGE: 94830 — PELLERIN MILNOR CORPORATION (USA)
SPECIFICATIONS
hole_diameter0.656 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
outside_diameter14.750 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter11.437 INCHES NOMINAL IN
bolt_hole_quantity12
bolt_circle_diameter13.250 INCHES NOMINAL IN
cross-sectional_thickness0.062 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-01-080-2929
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: IM880PC20 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
HOLE DIAMETER: 0.656 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE DIAMETER: 14.750 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
APERTURE DIAMETER: 11.437 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 12
•
BOLT CIRCLE DIAMETER: 13.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
HOLE DIAMETER0.656 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE DIAMETER14.750 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
APERTURE DIAMETER11.437 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
BOLT HOLE QUANTITY12
BOLT CIRCLE DIAMETER13.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
31624Interchangeable
interchangeable cross-reference
interchangeable
214108Interchangeable
interchangeable cross-reference
interchangeable
MP0-0113Interchangeable
interchangeable cross-reference
interchangeable
IM880ITEM20Interchangeable
interchangeable cross-reference
interchangeable
2-24108Interchangeable
interchangeable cross-reference
interchangeable
02-14108Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy IM880PC20?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is IM880PC20?
IM880PC20 is a GASKET.
What parts can replace IM880PC20?
There are 7 known substitutes for IM880PC20: 31624, 214108, MP0-0113 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for IM880PC20?
IM880PC20 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-080-2929. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — IM880PC20

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026