PartsTable
Technical Data Sheet
Download PDF

ID-118N — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

ID-118N: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, fork_depth: 1.000 INCHES NOMINAL IN, fork_span_width: 1.550 INCHES NOMINAL IN, style_designator: CLEVIS, fork_arm_thickness: 0.620 INCHES NOMINAL IN, end_item_identification: 2350-01-110-4660CARR CGO TRK 7T. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-198-0572, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ID-118N
NSN: 5340-01-198-0572
FSC: 5340 — Hardware, Commercial
CAGE: 79931 — ESMET INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
fork_depth1.000 INCHES NOMINAL IN
fork_span_width1.550 INCHES NOMINAL IN
style_designatorCLEVIS
fork_arm_thickness0.620 INCHES NOMINAL IN
end_item_identification2350-01-110-4660CARR CGO TRK 7T
NSN5340-01-198-0572
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: ID-118N MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FORK SPAN WIDTH: 1.550 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.620 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
•
MATERIAL: STEEL OVERALL
•
FORK DEPTH: 1.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FORK SPAN WIDTH1.550 INCHES NOMINAL IN
FORK ARM THICKNESS0.620 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
END ITEM IDENTIFICATION2350-01-110-4660CARR CGO TRK 7T
MATERIALSTEEL OVERALL
FORK DEPTH1.000 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
12333545Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
BML65452Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy ID-118N?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ID-118N?
ID-118N is a CLEVIS,ROD END.
What parts can replace ID-118N?
There are 2 known substitutes for ID-118N: 12333545, BML65452. Substitute compatibility should be verified for your specific system.
What is the NSN for ID-118N?
ID-118N is cataloged in the U.S. Government catalog under NSN 5340-01-198-0572. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ID-118N

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.