PartsTable
Technical Data Sheet
PartsTable / COMPONENT / I71216
I71216 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL BALL, bore_shape: STRAIGHT, bore_diameter: 1.0000 INCHES MINIMUM AND 1.0007 INCHES MAXIMUM IN, load_direction: ANGULAR, surface_finish: GROUND, inner_ring_width: 1.6030 INCHES MINIMUM AND 1.6080 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-8080, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
I71216
NSN: 3110-00-156-8080
FSC: 3110
CAGE: 21760 — SCHATZ BEARING CORPORATION DBA SCHATZ BEARING CORP (USA)
SPECIFICATIONS
materialSTEEL BALL
bore_shapeSTRAIGHT
bore_diameter1.0000 INCHES MINIMUM AND 1.0007 INCHES MAXIMUM IN
load_directionANGULAR
surface_finishGROUND
inner_ring_width1.6030 INCHES MINIMUM AND 1.6080 INCHES MAXIMUM IN
outer_ring_width15.00 MILLIMETERS NOMINAL MM
special_featuresSET SCREW IN INNER RING
style_designatorDOUBLE ROW BALL, INTERNAL SELF-ALIGNING, INNER RING EXTENDED ONE SIDE WITH SET SCREW IN INNER RING
overall_outside_diameter2.0467 INCHES MINIMUM AND 2.0472 INCHES MAXIMUM IN
internal_fit-up_designationSTANDARD
NSN3110-00-156-8080
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: I71216 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE SHAPE: STRAIGHT
•
STYLE DESIGNATOR: DOUBLE ROW BALL, INTERNAL SELF-ALIGNING, INNER RING EXTENDED ONE SIDE WITH SET SCREW IN INNER RING
•
MATERIAL: STEEL INNER RING
•
OUTER RING WIDTH: 15.00 MILLIMETERS NOMINAL MM
•
LOAD DIRECTION: ANGULAR
•
INTERNAL FIT-UP DESIGNATION: STANDARD
TECHNICAL CHARACTERISTICS (FLIS)
BORE SHAPESTRAIGHT
STYLE DESIGNATORDOUBLE ROW BALL, INTERNAL SELF-ALIGNING, INNER RING EXTENDED ONE SIDE WITH SET SCREW IN INNER RING
MATERIALSTEEL INNER RING
MATERIALSTEEL BALL
MATERIALSTEEL OUTER RING
OUTER RING WIDTH15.00 MILLIMETERS NOMINAL MM
LOAD DIRECTIONANGULAR
INTERNAL FIT-UP DESIGNATIONSTANDARD
OVERALL OUTSIDE DIAMETER2.0467 INCHES MINIMUM AND 2.0472 INCHES MAXIMUM IN
INNER RING WIDTH1.6030 INCHES MINIMUM AND 1.6080 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
M85049/138-33AInterchangeable
interchangeable cross-reference
interchangeable
10125974-112Interchangeable
interchangeable cross-reference
interchangeable
ES2426-02A032Interchangeable
interchangeable cross-reference
interchangeable
EC16Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy I71216?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is I71216?
I71216 is a BEARING,BALL,ANNULAR.
What parts can replace I71216?
There are 4 known substitutes for I71216: M85049/138-33A, 10125974-112, ES2426-02A032 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for I71216?
I71216 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-8080. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — I71216

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026