PartsTable
Technical Data Sheet
PartsTable / O-RING / I15624SR810B90
I15624SR810B90 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, temp_rating: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF, hardness_rating: 90.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.949 INCHES NOMINAL IN, center_hole_diameter: 0.750 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN, elongation_percentage: 80 MAXIMUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-108-5691, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
I15624SR810B90
NSN: 5331-00-108-5691
FSC: 5331 — O-RING
CAGE: F0229 — LE JOINT FRANCAIS (FRA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
temp_rating-65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
hardness_rating90.0 SHORE DUROMETER A NOMINAL
outside_diameter0.949 INCHES NOMINAL IN
center_hole_diameter0.750 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
elongation_percentage80 MAXIMUM
cross-sectional_height0.094 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
NSN5331-00-108-5691
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: I15624SR810B90 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.094 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.750 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
•
TEMP RATING: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
•
MATERIAL: RUBBER SYNTHETIC
•
ELONGATION PERCENTAGE: 80 MAXIMUM
•
OUTSIDE DIAMETER: 0.949 INCHES NOMINAL IN
•
HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.094 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.750 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
TEMP RATING-65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
MATERIALRUBBER SYNTHETIC
ELONGATION PERCENTAGE80 MAXIMUM
OUTSIDE DIAMETER0.949 INCHES NOMINAL IN
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 35
SAE-AS28778Interchangeable
interchangeable cross-reference
interchangeable
N94-84910Interchangeable
interchangeable cross-reference
interchangeable
0XN94-84910CPInterchangeable
interchangeable cross-reference
interchangeable
D6-10Interchangeable
interchangeable cross-reference
interchangeable
B10-2Interchangeable
interchangeable cross-reference
interchangeable
43654Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy I15624SR810B90?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is I15624SR810B90?
I15624SR810B90 is a O-RING.
What parts can replace I15624SR810B90?
There are 35 known substitutes for I15624SR810B90: SAE-AS28778, N94-84910, 0XN94-84910CP and 32 more. Substitute compatibility should be verified for your specific system.
Is I15624SR810B90 still available?
I15624SR810B90 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — I15624SR810B90

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026