PartsTable
Technical Data Sheet
Download PDF

I019194 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

I019194: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, head_diameter: 4.7 MILLIMETERS NOMINAL MM, thread_length: 6.5 MILLIMETERS NOMINAL MM, screw_material: STEEL COMP 304, fastener_length: 8.0 MILLIMETERS NOMINAL MM, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-701-7612, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
I019194
NSN: 5305-01-701-7612
FSC: 5305 — Screws
CAGE: 15526 — METRIC AND MULTISTANDARD COMPONENTS CORP (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
head_diameter4.7 MILLIMETERS NOMINAL MM
thread_length6.5 MILLIMETERS NOMINAL MM
screw_materialSTEEL COMP 304
fastener_length8.0 MILLIMETERS NOMINAL MM
thread_directionRIGHT-HAND
countersink_angle45.0 DEGREES NOMINAL
internal_drive_styleCROSS RECESS TYPE 1
end_item_identification5895-01-630-0207
nominal_thread_diameter2.5 MILLIMETERS MM
thread_series_designatorM
thread_pitch_in_millimeters0.45
NSN5305-01-701-7612
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: I019194 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 8.0 MILLIMETERS NOMINAL MM
•
THREAD PITCH IN MILLIMETERS: 0.45
•
THREAD LENGTH: 6.5 MILLIMETERS NOMINAL MM
•
NOMINAL THREAD DIAMETER: 2.5 MILLIMETERS MM
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL COMP 304
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
TECHNICAL CHARACTERISTICS
FASTENER LENGTH8.0 MILLIMETERS NOMINAL MM
THREAD PITCH IN MILLIMETERS0.45
THREAD LENGTH6.5 MILLIMETERS NOMINAL MM
NOMINAL THREAD DIAMETER2.5 MILLIMETERS MM
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP 304
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
COUNTERSINK ANGLE45.0 DEGREES NOMINAL
END ITEM IDENTIFICATION5895-01-630-0207
SUBSTITUTES & CROSS-REFERENCES 1
900351Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy I019194?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is I019194?
I019194 is a SCREW,MACHINE.
What parts can replace I019194?
There is 1 known substitute for I019194: 900351. Substitute compatibility should be verified for your specific system.
What is the NSN for I019194?
I019194 is cataloged in the U.S. Government catalog under NSN 5305-01-701-7612. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — I019194

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.