PartsTable
Technical Data Sheet
Download PDF

HW17X6 — NUT,SELF-LOCKING,ASSEMBLED WASHE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

HW17X6: NUT,SELF-LOCKING,ASSEMBLED WASHE.

NUT,SELF-LOCKING,ASSEMBLED WASHE. Key specifications include material: STEEL COMP 1050 WASHER, nut_style: FLAT WITH TURNED UP EDGE, nut_height: 0.188 INCHES NOMINAL IN, thread_class: 3B, thread_series: UNIFIED NATIONAL JOINT FINE (UNJF), overall_height: 0.341 INCHES MINIMUM AND 0.361 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-958-8845, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HW17X6
NSN: 5310-00-958-8845
FSC: 5310 — Nuts and Washers
CAGE: 15653 — HOWMET GLOBAL FASTENING SYSTEMS INC (USA)
SPECIFICATIONS
materialSTEEL COMP 1050 WASHER
nut_styleFLAT WITH TURNED UP EDGE
nut_height0.188 INCHES NOMINAL IN
thread_class3B
thread_seriesUNIFIED NATIONAL JOINT FINE (UNJF)
overall_height0.341 INCHES MINIMUM AND 0.361 INCHES MAXIMUM IN
hardness_rating36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
locking_featurePREVAILING TORQUE ALL METAL DESIGN
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
width_across_flats0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN
nominal_thread_size0.375 INCHES IN
NSN5310-00-958-8845
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: HW17X6 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WASHER OUTSIDE DIAMETER: 0.660 INCHES MAXIMUM IN
•
WIDTH ACROSS FLATS: 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)
•
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE NUT
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.341 INCHES MINIMUM AND 0.361 INCHES MAXIMUM IN
WASHER OUTSIDE DIAMETER0.660 INCHES MAXIMUM IN
WIDTH ACROSS FLATS0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNIFIED NATIONAL JOINT FINE (UNJF)
HARDNESS RATING36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE NUT
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A108 ASSN STD SINGLE MATERIAL RESPONSE WASHER
NUT COUNTERBORE DEPTH0.072 INCHES MINIMUM AND 0.087 INCHES MAXIMUM NUT IN
THREAD DIRECTIONRIGHT-HAND
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 2
TLN1000-6Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5310PL0904727Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy HW17X6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HW17X6?
HW17X6 is a NUT,SELF-LOCKING,ASSEMBLED WASHE.
What parts can replace HW17X6?
There are 2 known substitutes for HW17X6: TLN1000-6, 5310PL0904727. Substitute compatibility should be verified for your specific system.
What is the NSN for HW17X6?
HW17X6 is cataloged in the U.S. Government catalog under NSN 5310-00-958-8845. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HW17X6

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.