PartsTable
Technical Data Sheet
PartsTable / COMPONENT / HW-T0093-015
HW-T0093-015 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STANDOFF,THREADED,SPACING is a the manufacturer industrial component. Key specifications include length: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN, diameter: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, style_designator: INTERNALLY THREADED FULL LENGTH, cross-sectional_shape: ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-216-1665, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HW-T0093-015
NSN: 5340-01-216-1665
FSC: 5340
CAGE: 33875 — RAYTHEON E-SYSTEMS, INC (USA)
SPECIFICATIONS
length0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
diameter0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
style_designatorINTERNALLY THREADED FULL LENGTH
cross-sectional_shapeROUND
NSN5340-01-216-1665
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: HW-T0093-015 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: INTERNALLY THREADED FULL LENGTH
•
DIAMETER: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE: ROUND
•
LENGTH: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORINTERNALLY THREADED FULL LENGTH
DIAMETER0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPEROUND
LENGTH0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
8367Upgraded Successor
successor cross-reference
successor
10PA3Interchangeable
interchangeable cross-reference
interchangeable
RS5Interchangeable
interchangeable cross-reference
interchangeable
456Interchangeable
interchangeable cross-reference
interchangeable
803Interchangeable
interchangeable cross-reference
interchangeable
C8367Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy HW-T0093-015?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HW-T0093-015?
HW-T0093-015 is a STANDOFF,THREADED,SPACING.
What parts can replace HW-T0093-015?
There are 13 known substitutes for HW-T0093-015: 8367, 10PA3, RS5 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for HW-T0093-015?
HW-T0093-015 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-216-1665. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HW-T0093-015

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026