PartsTable
Technical Data Sheet
PartsTable / COMPONENT / HW-T0024-002
HW-T0024-002 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STANDOFF,THREADED,SPACING is a the manufacturer industrial component. Key specifications include length: 1.500 INCHES NOMINAL IN, diameter: 0.250 INCHES NOMINAL IN, material: ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 6063 OR ALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 2011 OVERALL, style_designator: INTERNALLY THREADED FULL LENGTH, surface_treatment: CHROMATE OVERALL, cross-sectional_shape: ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-973-8191, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HW-T0024-002
NSN: 5340-00-973-8191
FSC: 5340
CAGE: 33875 — RAYTHEON E-SYSTEMS, INC (USA)
SPECIFICATIONS
length1.500 INCHES NOMINAL IN
diameter0.250 INCHES NOMINAL IN
materialALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 6063 OR ALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 2011 OVERALL
style_designatorINTERNALLY THREADED FULL LENGTH
surface_treatmentCHROMATE OVERALL
cross-sectional_shapeROUND
surface_treatment_document_and_classificationMIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-00-973-8191
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: HW-T0024-002 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL: ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 6063 OR ALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 2011 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-200/8 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-200/9 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-225/6 FED SPEC 3RD MATERIAL RESPONSE OR QQ-A-225/8 FED SPEC 4TH MATERIAL RESPONSE OR QQ-A-225/3 FED SPEC 5TH MATERIAL RESPONSE OVERALL
•
SURFACE TREATMENT: CHROMATE OVERALL
•
STYLE DESIGNATOR: INTERNALLY THREADED FULL LENGTH
•
CROSS-SECTIONAL SHAPE: ROUND
•
LENGTH: 1.500 INCHES NOMINAL IN
•
DIAMETER: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIALALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 6063 OR ALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 2011 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-200/8 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-200/9 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-225/6 FED SPEC 3RD MATERIAL RESPONSE OR QQ-A-225/8 FED SPEC 4TH MATERIAL RESPONSE OR QQ-A-225/3 FED SPEC 5TH MATERIAL RESPONSE OVERALL
SURFACE TREATMENTCHROMATE OVERALL
STYLE DESIGNATORINTERNALLY THREADED FULL LENGTH
CROSS-SECTIONAL SHAPEROUND
LENGTH1.500 INCHES NOMINAL IN
DIAMETER0.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
83-49Upgraded Successor
successor cross-reference
successor
5910649Interchangeable
interchangeable cross-reference
interchangeable
MIL-F-45569Interchangeable
interchangeable cross-reference
interchangeable
8313Interchangeable
interchangeable cross-reference
interchangeable
50349Interchangeable
interchangeable cross-reference
interchangeable
PC-285Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy HW-T0024-002?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HW-T0024-002?
HW-T0024-002 is a STANDOFF,THREADED,SPACING.
What parts can replace HW-T0024-002?
There are 15 known substitutes for HW-T0024-002: 83-49, 5910649, MIL-F-45569 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for HW-T0024-002?
HW-T0024-002 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-973-8191. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HW-T0024-002

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026