HW-T0017-005 — SPACER,SLEEVE

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

HW-T0017-005: SPACER,SLEEVE.

The SPACER,SLEEVE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061 OVERALL, flange_width: 0.0910 INCHES NOMINAL IN, overall_length: 1.2450 INCHES MINIMUM AND 1.2550 INCHES MAXIMUM IN, surface_treatment: CHROMATE OVERALL, body_inside_diameter: 0.1970 INCHES NOMINAL IN, body_outside_diameter: 0.3200 INCHES MINIMUM AND 0.3300 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5365-01-293-9568, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

HW-T0017-005

NSN: 5365-01-293-9568
FSC: 5365 — Bushings, Rings, Shims, and Spacers
CAGE: 33875 — RAYTHEON E-SYSTEMS, INC (USA)

SPECIFICATIONS

material	ALUMINUM ALLOY 6061 OVERALL
flange_width	0.0910 INCHES NOMINAL IN
overall_length	1.2450 INCHES MINIMUM AND 1.2550 INCHES MAXIMUM IN
surface_treatment	CHROMATE OVERALL
body_inside_diameter	0.1970 INCHES NOMINAL IN
body_outside_diameter	0.3200 INCHES MINIMUM AND 0.3300 INCHES MAXIMUM IN
material_document_and_classification	MIL-A-12545,TEMPER T6 MIL SPEC SINGLE MATERIAL RESPONSE OUTSIDE DIAMETER SURFACE OF BODY
surface_treatment_document_and_classification	MIL-C-5541,CLASS 1A OR CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL A
NSN	5365-01-293-9568

COMPONENT DIAGRAM

KEY FEATURES

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541,CLASS 1A OR CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL A

•

BODY OUTSIDE DIAMETER: 0.3200 INCHES MINIMUM AND 0.3300 INCHES MAXIMUM IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-A-12545,TEMPER T6 MIL SPEC SINGLE MATERIAL RESPONSE OUTSIDE DIAMETER SURFACE OF BODY

•

BODY INSIDE DIAMETER: 0.1970 INCHES NOMINAL IN

•

SURFACE TREATMENT: CHROMATE OVERALL

•

FLANGE WIDTH: 0.0910 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-5541,CLASS 1A OR CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL A
BODY OUTSIDE DIAMETER	0.3200 INCHES MINIMUM AND 0.3300 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-A-12545,TEMPER T6 MIL SPEC SINGLE MATERIAL RESPONSE OUTSIDE DIAMETER SURFACE OF BODY
OVERALL LENGTH	1.2450 INCHES MINIMUM AND 1.2550 INCHES MAXIMUM IN
BODY INSIDE DIAMETER	0.1970 INCHES NOMINAL IN
SPECIAL FEATURES	SLEEVE HAS AN ELONGATED FLANGE,0.9850 INCHES LONG,0.3960 INCHES WIDE; TWO BOLT HOLES 0.0980INCHES NOMINAL DIAMETER LOCATED 0.3430 INCHES NOMINAL FROM CENTER OF INSIDE DIAMETER TO CENTER OF EITHER BOLT HOLE IN
SURFACE TREATMENT	CHROMATE OVERALL
FLANGE WIDTH	0.0910 INCHES NOMINAL IN
MATERIAL	ALUMINUM ALLOY 6061 OVERALL

OTHER ITEMS IN FSC 5365 — Bushings, Rings, Shims, and Spacers

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5365-00-000-6078 5365-00-000-7436 5365-00-001-1292 5365-00-001-1365 5365-00-001-1841 5365-00-001-1915 5365-00-001-1916 5365-00-001-1940

SUBSTITUTES & CROSS-REFERENCES 3

4M72-3-125Reference document

Same NSN cross-reference

Reference document — Secondary reference

SL2609-3-125Reference document

Same NSN cross-reference

Reference document — Secondary reference

WSI-10-125Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy HW-T0017-005?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is HW-T0017-005?

HW-T0017-005 is a SPACER,SLEEVE.

What parts can replace HW-T0017-005?

There are 3 known substitutes for HW-T0017-005: 4M72-3-125, SL2609-3-125, WSI-10-125. Substitute compatibility should be verified for your specific system.

What is the NSN for HW-T0017-005?

HW-T0017-005 is cataloged in the U.S. Government catalog under NSN 5365-01-293-9568. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

HW-T0017-005 — SPACER,SLEEVE

Request a Quote — HW-T0017-005