PartsTable
Technical Data Sheet
Download PDF

HW-C0003-005 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

HW-C0003-005: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.203 INCHES NOMINAL IN, overall_width: 0.375 INCHES NOMINAL IN, material_thickness: 0.050 INCHES NOMINAL IN, loop_inside_diameter: 0.375 INCHES NOMINAL IN, distance_from_loop_center_to_tongue_end: 0.690 INCHES NOMINAL IN, center_to_center_distance_between_loop_and_mounting_hole: 0.471 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-116-9596, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HW-C0003-005
NSN: 5340-01-116-9596
FSC: 5340 — Hardware, Commercial
CAGE: 33875 — RAYTHEON E-SYSTEMS, INC (USA)
SPECIFICATIONS
diameter0.203 INCHES NOMINAL IN
overall_width0.375 INCHES NOMINAL IN
material_thickness0.050 INCHES NOMINAL IN
loop_inside_diameter0.375 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end0.690 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.471 INCHES NOMINAL IN
NSN5340-01-116-9596
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: HW-C0003-005 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.203 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.050 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.690 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.471 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 0.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
DIAMETER0.203 INCHES NOMINAL IN
OVERALL WIDTH0.375 INCHES NOMINAL IN
MATERIAL THICKNESS0.050 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.690 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.471 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.375 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy HW-C0003-005?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HW-C0003-005?
HW-C0003-005 is a CLAMP,LOOP.
What is the NSN for HW-C0003-005?
HW-C0003-005 is cataloged in the U.S. Government catalog under NSN 5340-01-116-9596. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HW-C0003-005

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.