PartsTable
Technical Data Sheet
Download PDF

HTS467-4-18 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

HTS467-4-18: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: FLAT COUNTERSUNK, grip_length: 1.1115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN, head_diameter: 0.501 INCHES MINIMUM AND 0.506 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-237-5116, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HTS467-4-18
NSN: 5305-01-237-5116
FSC: 5305 — Screws
CAGE: 17446 — HUCK INTERNATIONAL, INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleFLAT COUNTERSUNK
grip_length1.1115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
head_diameter0.501 INCHES MINIMUM AND 0.506 INCHES MAXIMUM IN
thread_length0.443 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
fastener_length1.578 INCHES MINIMUM AND 1.625 INCHES MAXIMUM IN
special_featuresFURNISHED WITH O-RING
thread_directionRIGHT-HAND
countersink_angle100.0 DEGREES NOMINAL
surface_treatmentCADMIUM OVERALL
NSN5305-01-237-5116
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: HTS467-4-18 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 1.578 INCHES MINIMUM AND 1.625 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: 3-48 CAGE 76301 MFR REF SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.443 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 3-48 CAGE 76301 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
GRIP LENGTH: 1.1115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FASTENER LENGTH1.578 INCHES MINIMUM AND 1.625 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION3-48 CAGE 76301 MFR REF SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.443 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION3-48 CAGE 76301 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH1.1115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN
GRIP DIAMETER0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
SPECIAL FEATURESFURNISHED WITH O-RING
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 4
HT408A-4-18Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
HT4UA-CA-4-18Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
54266-4-18Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
3M46-4-18Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy HTS467-4-18?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HTS467-4-18?
HTS467-4-18 is a SCREW,CLOSE TOLERANCE.
What parts can replace HTS467-4-18?
There are 4 known substitutes for HTS467-4-18: HT408A-4-18, HT4UA-CA-4-18, 54266-4-18 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for HTS467-4-18?
HTS467-4-18 is cataloged in the U.S. Government catalog under NSN 5305-01-237-5116. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HTS467-4-18

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.