PartsTable
Technical Data Sheet
Download PDF

HTR207-9 — CAM FOLLOWER,NEEDLE BEARING

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

HTR207-9: CAM FOLLOWER,NEEDLE BEARING.

The CAM FOLLOWER,NEEDLE BEARING is a the manufacturer industrial component. Key specifications include stud_length: 1.2690 INCHES MINIMUM AND 1.2940 INCHES MAXIMUM IN, thread_class: 3A A, stud_diameter: 0.5000 INCHES MINIMUM AND 0.5015 INCHES MAXIMUM IN, thread_length: 0.7020 INCHES MINIMUM AND 0.7180 INCHES MAXIMUM IN, overall_length: 2.0140 INCHES MINIMUM AND 2.0440 INCHES MAXIMUM IN, outer_ring_width: 0.7450 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-338-6935, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HTR207-9
NSN: 3110-01-338-6935
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 02758 — U S BEARINGS (USA)
SPECIFICATIONS
stud_length1.2690 INCHES MINIMUM AND 1.2940 INCHES MAXIMUM IN
thread_class3A A
stud_diameter0.5000 INCHES MINIMUM AND 0.5015 INCHES MAXIMUM IN
thread_length0.7020 INCHES MINIMUM AND 0.7180 INCHES MAXIMUM IN
overall_length2.0140 INCHES MINIMUM AND 2.0440 INCHES MAXIMUM IN
outer_ring_width0.7450 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
special_featuresPOLYTETRAFLUOROETHYLENE FABRIC SELF-LUBRICATING LINER BONDED TO RACE I.D. AND FACES
style_designatorCAM FOLLOWER
thread_directionRIGHT-HAND
nominal_thread_size0.5000 INCHES IN
overall_outside_diameter1.2495 INCHES MINIMUM AND 1.2510 INCHES MAXIMUM IN
thread_quantity_per_inch20
NSN3110-01-338-6935
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: HTR207-9 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER RING WIDTH: 0.7450 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.7020 INCHES MINIMUM AND 0.7180 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CAM FOLLOWER
•
OVERALL OUTSIDE DIAMETER: 1.2495 INCHES MINIMUM AND 1.2510 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.5000 INCHES IN
•
STUD LENGTH: 1.2690 INCHES MINIMUM AND 1.2940 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OUTER RING WIDTH0.7450 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
THREAD LENGTH0.7020 INCHES MINIMUM AND 0.7180 INCHES MAXIMUM IN
STYLE DESIGNATORCAM FOLLOWER
OVERALL LENGTH2.0140 INCHES MINIMUM AND 2.0440 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER1.2495 INCHES MINIMUM AND 1.2510 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.5000 INCHES IN
STUD LENGTH1.2690 INCHES MINIMUM AND 1.2940 INCHES MAXIMUM IN
SPECIAL FEATURESPOLYTETRAFLUOROETHYLENE FABRIC SELF-LUBRICATING LINER BONDED TO RACE I.D. AND FACES
THREAD CLASS3A A
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
510-13411-9Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy HTR207-9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HTR207-9?
HTR207-9 is a CAM FOLLOWER,NEEDLE BEARING.
What parts can replace HTR207-9?
There is 1 known substitute for HTR207-9: 510-13411-9. Substitute compatibility should be verified for your specific system.
What is the NSN for HTR207-9?
HTR207-9 is cataloged in the U.S. Government catalog under NSN 3110-01-338-6935. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HTR207-9

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.