PartsTable
Technical Data Sheet
Download PDF

HT8141-3-7 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

HT8141-3-7: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: FLAT COUNTERSUNK, grip_length: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN, head_diameter: 0.266 INCHES MINIMUM AND 0.303 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-040-9516, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HT8141-3-7
NSN: 5305-00-040-9516
FSC: 5305 — Screws
CAGE: 92215 — HOWMET GLOBAL FASTENING SYSTEMS INC DIV TORRANCE OPERATIONS (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleFLAT COUNTERSUNK
grip_length0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN
head_diameter0.266 INCHES MINIMUM AND 0.303 INCHES MAXIMUM IN
thread_length0.306 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN
fastener_length0.754 INCHES MINIMUM AND 0.784 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
internal_drive_styleHIGH-TORQUE
nominal_thread_diameter0.190 INCHES IN
NSN5305-00-040-9516
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: HT8141-3-7 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.754 INCHES MINIMUM AND 0.784 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.306 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 23-112,76301 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SPECIFICATION/STANDARD DATA: 08524-B-19021 MANUFACTURERS STANDARD
•
GRIP LENGTH: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FASTENER LENGTH0.754 INCHES MINIMUM AND 0.784 INCHES MAXIMUM IN
THREAD LENGTH0.306 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION23-112,76301 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SPECIFICATION/STANDARD DATA08524-B-19021 MANUFACTURERS STANDARD
GRIP LENGTH0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
GRIP DIAMETER0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN
MINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH LBS
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 5
ST3M455-3-7Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
HT291-3-7Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
109454-3-7Reference document
Same NSN cross-reference
Reference document — Secondary reference
BM19021-3-7Reference document
Same NSN cross-reference
Reference document — Secondary reference
11907-3-7Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy HT8141-3-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HT8141-3-7?
HT8141-3-7 is a SCREW,CLOSE TOLERANCE.
What parts can replace HT8141-3-7?
There are 5 known substitutes for HT8141-3-7: ST3M455-3-7, HT291-3-7, 109454-3-7 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for HT8141-3-7?
HT8141-3-7 is cataloged in the U.S. Government catalog under NSN 5305-00-040-9516. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HT8141-3-7

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.