PartsTable
Technical Data Sheet
Download PDF

HT8100-3-18 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

HT8100-3-18: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: TITANIUM ALLOY UNS R54520 OVERALL, head_style: FLAT COUNTERSUNK, grip_length: 1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN, head_diameter: 0.325 INCHES MINIMUM AND 0.387 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-044-7113, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HT8100-3-18
NSN: 5305-01-044-7113
FSC: 5305 — Screws
CAGE: 06950 — HOWMET GLOBAL FASTENING SYSTEMS INC (USA)
SPECIFICATIONS
materialTITANIUM ALLOY UNS R54520 OVERALL
head_styleFLAT COUNTERSUNK
grip_length1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN
head_diameter0.325 INCHES MINIMUM AND 0.387 INCHES MAXIMUM IN
thread_length0.313 INCHES MINIMUM AND 0.363 INCHES MAXIMUM IN
surface_finish63.0 MICROINCHES GRIP
fastener_length1.448 INCHES MINIMUM AND 1.478 INCHES MAXIMUM IN
special_featuresDRY FILM LUBRICANT SURFACE TREATMENT
thread_directionRIGHT-HAND
countersink_angle100.0 DEGREES NOMINAL
NSN5305-01-044-7113
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: HT8100-3-18 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 63.0 MICROINCHES GRIP
•
FASTENER LENGTH: 1.448 INCHES MINIMUM AND 1.478 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.313 INCHES MINIMUM AND 0.363 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SPECIFICATION/STANDARD DATA: 26512-GB510F PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
GRIP LENGTH: 1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE FINISH63.0 MICROINCHES GRIP
FASTENER LENGTH1.448 INCHES MINIMUM AND 1.478 INCHES MAXIMUM IN
THREAD LENGTH0.313 INCHES MINIMUM AND 0.363 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SPECIFICATION/STANDARD DATA26512-GB510F PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
GRIP LENGTH1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN
GRIP DIAMETER0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN
SPECIAL FEATURESDRY FILM LUBRICANT SURFACE TREATMENT
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 6
HT260LB-3-18Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
BM19024-3-18Reference document
Same NSN cross-reference
Reference document — Secondary reference
66584-3-18Reference document
Same NSN cross-reference
Reference document — Secondary reference
T150-3-18Reference document
Same NSN cross-reference
Reference document — Secondary reference
GB510CH3V18Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
GB510F3-18Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy HT8100-3-18?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HT8100-3-18?
HT8100-3-18 is a SCREW,CLOSE TOLERANCE.
What parts can replace HT8100-3-18?
There are 6 known substitutes for HT8100-3-18: HT260LB-3-18, BM19024-3-18, 66584-3-18 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for HT8100-3-18?
HT8100-3-18 is cataloged in the U.S. Government catalog under NSN 5305-01-044-7113. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HT8100-3-18

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.