PartsTable
Technical Data Sheet
Download PDF

HT8043-5-18 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

HT8043-5-18: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, grip_length: 1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN, head_diameter: 0.469 INCHES MINIMUM AND 0.474 INCHES MAXIMUM IN, thread_length: 0.349 INCHES MINIMUM AND 0.416 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-043-0014, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HT8043-5-18
NSN: 5305-01-043-0014
FSC: 5305 — Screws
CAGE: 06950 — HOWMET GLOBAL FASTENING SYSTEMS INC (USA)
SPECIFICATIONS
materialSTEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OR STEEL COMP 4130 OVERALL
head_styleFLAT COUNTERSUNK
grip_length1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
head_diameter0.469 INCHES MINIMUM AND 0.474 INCHES MAXIMUM IN
thread_length0.349 INCHES MINIMUM AND 0.416 INCHES MAXIMUM IN
surface_finish63.0 MICROINCHES GRIP
fastener_length1.484 INCHES MINIMUM AND 1.531 INCHES MAXIMUM IN
hardness_rating30.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
countersink_angle100.0 DEGREES NOMINAL
NSN5305-01-043-0014
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: HT8043-5-18 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 63.0 MICROINCHES GRIP
•
FASTENER LENGTH: 1.484 INCHES MINIMUM AND 1.531 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.349 INCHES MINIMUM AND 0.416 INCHES MAXIMUM IN
•
HARDNESS RATING: 30.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
TECHNICAL CHARACTERISTICS
SURFACE FINISH63.0 MICROINCHES GRIP
SURFACE FINISH63.0 MICROINCHES THREADS
FASTENER LENGTH1.484 INCHES MINIMUM AND 1.531 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.349 INCHES MINIMUM AND 0.416 INCHES MAXIMUM IN
HARDNESS RATING30.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
NOMINAL THREAD DIAMETER0.312 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SPECIFICATION/STANDARD DATA26512-GB510L PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 4
HT239PB-5-18Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
BM19025-5-18Reference document
Same NSN cross-reference
Reference document — Secondary reference
A147-5-18Reference document
Same NSN cross-reference
Reference document — Secondary reference
GB510L5-18Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy HT8043-5-18?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HT8043-5-18?
HT8043-5-18 is a SCREW,CLOSE TOLERANCE.
What parts can replace HT8043-5-18?
There are 4 known substitutes for HT8043-5-18: HT239PB-5-18, BM19025-5-18, A147-5-18 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for HT8043-5-18?
HT8043-5-18 is cataloged in the U.S. Government catalog under NSN 5305-01-043-0014. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HT8043-5-18

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.