PartsTable
Technical Data Sheet
Download PDF

HT5UA12 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

HT5UA12: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK UNDERCUT, head_height: 0.087 INCHES MINIMUM AND 0.089 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.6287 INCHES MINIMUM AND 0.6335 INCHES MAXIMUM IN, thread_length: 0.511 INCHES NOMINAL IN, screw_material: STEEL COMP 8740. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-125-5033, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HT5UA12
NSN: 5305-01-125-5033
FSC: 5305 — Screws
CAGE: L4528 — LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC (CAN)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK UNDERCUT
head_height0.087 INCHES MINIMUM AND 0.089 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.6287 INCHES MINIMUM AND 0.6335 INCHES MAXIMUM IN
thread_length0.511 INCHES NOMINAL IN
screw_materialSTEEL COMP 8740
fastener_length1.281 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle100.0 DEGREES NOMINAL
internal_drive_styleHIGH-TORQUE
nominal_thread_diameter0.312 INCHES IN
screw_surface_treatmentCADMIUM
NSN5305-01-125-5033
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: HT5UA12 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.087 INCHES MINIMUM AND 0.089 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: CADMIUM
•
FASTENER LENGTH: 1.281 INCHES NOMINAL IN
•
THREAD LENGTH: 0.511 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK UNDERCUT
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL COMP 8740
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.087 INCHES MINIMUM AND 0.089 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTCADMIUM
FASTENER LENGTH1.281 INCHES NOMINAL IN
THREAD LENGTH0.511 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.312 INCHES IN
HEAD STYLEFLAT COUNTERSUNK UNDERCUT
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP 8740
INTERNAL DRIVE STYLEHIGH-TORQUE
COUNTERSINK ANGLE100.0 DEGREES NOMINAL
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 3
HT403A5-12Reference document
Same NSN cross-reference
Reference document — Secondary reference
54266-5-12Reference document
Same NSN cross-reference
Reference document — Secondary reference
3M47-5-12Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy HT5UA12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HT5UA12?
HT5UA12 is a SCREW,MACHINE.
What parts can replace HT5UA12?
There are 3 known substitutes for HT5UA12: HT403A5-12, 54266-5-12, 3M47-5-12. Substitute compatibility should be verified for your specific system.
What is the NSN for HT5UA12?
HT5UA12 is cataloged in the U.S. Government catalog under NSN 5305-01-125-5033. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HT5UA12