PartsTable
Technical Data Sheet
Download PDF

HT4U1C — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

HT4U1C: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, head_height: 0.073 INCHES NOMINAL IN, thread_class: 3A A, head_diameter: 0.502 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN, thread_length: 0.469 INCHES MINIMUM IN, screw_material: STEEL. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-957-3556, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HT4U1C
NSN: 5305-00-957-3556
FSC: 5305 — Screws
CAGE: 73197 — HI-SHEAR CORPORATION (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
head_height0.073 INCHES NOMINAL IN
thread_class3A A
head_diameter0.502 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
thread_length0.469 INCHES MINIMUM IN
screw_materialSTEEL
fastener_length1.094 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle100.0 DEGREES NOMINAL
internal_drive_styleHIGH-TORQUE
nominal_thread_diameter0.250 INCHES IN
screw_surface_treatmentCADMIUM
NSN5305-00-957-3556
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: HT4U1C · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.073 INCHES NOMINAL IN
•
SCREW SURFACE TREATMENT: CADMIUM
•
FASTENER LENGTH: 1.094 INCHES NOMINAL IN
•
THREAD LENGTH: 0.469 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.073 INCHES NOMINAL IN
SCREW SURFACE TREATMENTCADMIUM
FASTENER LENGTH1.094 INCHES NOMINAL IN
THREAD LENGTH0.469 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLEHIGH-TORQUE
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 3
3M48-4-10Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
HT4U-10Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
HT408-4-10Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy HT4U1C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HT4U1C?
HT4U1C is a SCREW,MACHINE.
What parts can replace HT4U1C?
There are 3 known substitutes for HT4U1C: 3M48-4-10, HT4U-10, HT408-4-10. Substitute compatibility should be verified for your specific system.
What is the NSN for HT4U1C?
HT4U1C is cataloged in the U.S. Government catalog under NSN 5305-00-957-3556. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HT4U1C