PartsTable
Technical Data Sheet
Download PDF

HT4054-3-7A — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

HT4054-3-7A: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 8740 OVERALL, head_style: FLAT COUNTERSUNK, grip_length: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.3145 INCHES MINIMUM AND 0.3147 INCHES MAXIMUM IN, head_diameter: 0.339 INCHES MINIMUM AND 0.381 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-280-6738, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HT4054-3-7A
NSN: 5305-01-280-6738
FSC: 5305 — Screws
CAGE: 92215 — HOWMET GLOBAL FASTENING SYSTEMS INC DIV TORRANCE OPERATIONS (USA)
SPECIFICATIONS
materialSTEEL COMP 8740 OVERALL
head_styleFLAT COUNTERSUNK
grip_length0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.3145 INCHES MINIMUM AND 0.3147 INCHES MAXIMUM IN
head_diameter0.339 INCHES MINIMUM AND 0.381 INCHES MAXIMUM IN
thread_length0.313 INCHES MINIMUM AND 0.363 INCHES MAXIMUM IN
surface_finish32.0 MICROINCHES THREADS
fastener_length0.761 INCHES MINIMUM AND 0.791 INCHES MAXIMUM IN
hardness_rating39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
NSN5305-01-280-6738
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: HT4054-3-7A · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 32.0 MICROINCHES THREADS
•
FASTENER LENGTH: 0.761 INCHES MINIMUM AND 0.791 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-83488 TY 2 CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.313 INCHES MINIMUM AND 0.363 INCHES MAXIMUM IN
•
HARDNESS RATING: 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-C-6049 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
SURFACE FINISH32.0 MICROINCHES THREADS
SURFACE FINISH32.0 MICROINCHES GRIP
SURFACE FINISH23.0 MICROINCHES BEARING SURFACE OF HEAD
FASTENER LENGTH0.761 INCHES MINIMUM AND 0.791 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-83488 TY 2 CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.313 INCHES MINIMUM AND 0.363 INCHES MAXIMUM IN
HARDNESS RATING39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-C-6049 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.190 INCHES IN
FEATURES PROVIDEDCETYL ALCOHOL LUBRICANT
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 2
ST3M730-3L7Reference document
Same NSN cross-reference
Reference document — Secondary reference
10113637Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy HT4054-3-7A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HT4054-3-7A?
HT4054-3-7A is a SCREW,CLOSE TOLERANCE.
What parts can replace HT4054-3-7A?
There are 2 known substitutes for HT4054-3-7A: ST3M730-3L7, 10113637. Substitute compatibility should be verified for your specific system.
What is the NSN for HT4054-3-7A?
HT4054-3-7A is cataloged in the U.S. Government catalog under NSN 5305-01-280-6738. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HT4054-3-7A

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.