PartsTable
Technical Data Sheet
Download PDF

HT4041-5-11M7 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

HT4041-5-11M7: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL COMP XM-13 OVERALL, head_style: OVAL COUNTERSUNK, grip_length: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN, head_diameter: 0.4689 INCHES MINIMUM AND 0.4739 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-351-5121, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HT4041-5-11M7
NSN: 5305-01-351-5121
FSC: 5305 — Screws
CAGE: 17446 — HUCK INTERNATIONAL, INC (USA)
SPECIFICATIONS
materialSTEEL COMP XM-13 OVERALL
head_styleOVAL COUNTERSUNK
grip_length0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
head_diameter0.4689 INCHES MINIMUM AND 0.4739 INCHES MAXIMUM IN
thread_length0.438 INCHES NOMINAL IN
fastener_length1.111 INCHES MINIMUM AND 1.141 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
surface_treatmentPASSIVATE OVERALL
internal_drive_styleHIGH-TORQUE
NSN5305-01-351-5121
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: HT4041-5-11M7 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 1.111 INCHES MINIMUM AND 1.141 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.438 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
HEAD STYLE: OVAL COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
GRIP LENGTH: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FASTENER LENGTH1.111 INCHES MINIMUM AND 1.141 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.438 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.312 INCHES IN
HEAD STYLEOVAL COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM IN
GRIP DIAMETER0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 3
10113721Reference document
Same NSN cross-reference
Reference document — Informative reference only
3M707-5-11-7-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
11873-5-11-7-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy HT4041-5-11M7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HT4041-5-11M7?
HT4041-5-11M7 is a SCREW,CLOSE TOLERANCE.
What parts can replace HT4041-5-11M7?
There are 3 known substitutes for HT4041-5-11M7: 10113721, 3M707-5-11-7-1, 11873-5-11-7-1. Substitute compatibility should be verified for your specific system.
What is the NSN for HT4041-5-11M7?
HT4041-5-11M7 is cataloged in the U.S. Government catalog under NSN 5305-01-351-5121. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HT4041-5-11M7

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.