PartsTable
Technical Data Sheet
Download PDF

HT4025L4D24 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

HT4025L4D24: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL COMP XM-13 OVERALL, head_style: FLAT COUNTERSUNK, grip_length: 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN, head_diameter: 0.456 INCHES MINIMUM AND 0.508 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-280-6743, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HT4025L4D24
NSN: 5305-01-280-6743
FSC: 5305 — Screws
CAGE: 80539 — SPS TECHNOLOGIES, LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA (USA)
SPECIFICATIONS
materialSTEEL COMP XM-13 OVERALL
head_styleFLAT COUNTERSUNK
grip_length1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
head_diameter0.456 INCHES MINIMUM AND 0.508 INCHES MAXIMUM IN
thread_length0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN
fastener_length1.954 INCHES MINIMUM AND 1.984 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
surface_treatmentPASSIVATE OVERALL
internal_drive_styleHIGH-TORQUE
NSN5305-01-280-6743
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: HT4025L4D24 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 1.954 INCHES MINIMUM AND 1.984 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN
•
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
FASTENER LENGTH1.954 INCHES MINIMUM AND 1.984 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN
SHANK UNTHREADED HOLE DIAMETER0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM IN
GRIP DIAMETER0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 2
ST3M454-4DL24Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
11905-4DL24Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy HT4025L4D24?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HT4025L4D24?
HT4025L4D24 is a SCREW,CLOSE TOLERANCE.
What parts can replace HT4025L4D24?
There are 2 known substitutes for HT4025L4D24: ST3M454-4DL24, 11905-4DL24. Substitute compatibility should be verified for your specific system.
What is the NSN for HT4025L4D24?
HT4025L4D24 is cataloged in the U.S. Government catalog under NSN 5305-01-280-6743. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HT4025L4D24

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.