PartsTable
Technical Data Sheet
PartsTable / COMPONENT / HT4024L3-10
HT4024L3-10 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, head_style: OVAL COUNTERSUNK, grip_length: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN, head_diameter: 0.297 INCHES MINIMUM AND 0.302 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-354-4237, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HT4024L3-10
NSN: 5305-00-354-4237
FSC: 5305
CAGE: 0PTK6 — SPS TECHNOLOGIES INC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
head_styleOVAL COUNTERSUNK
grip_length0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN
head_diameter0.297 INCHES MINIMUM AND 0.302 INCHES MAXIMUM IN
thread_length0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN
fastener_length1.016 INCHES MINIMUM AND 1.046 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
surface_treatmentPASSIVATE OVERALL
internal_drive_styleHIGH-TORQUE
NSN5305-00-354-4237
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: HT4024L3-10 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL DRIVE STYLE: HIGH-TORQUE
•
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD LENGTH: 0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN
•
THREAD CLASS: 3A A
•
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH LBS
•
HEAD STYLE: OVAL COUNTERSUNK
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
INTERNAL DRIVE STYLEHIGH-TORQUE
COUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN
THREAD CLASS3A A
MINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH LBS
HEAD STYLEOVAL COUNTERSUNK
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD DIAMETER0.297 INCHES MINIMUM AND 0.302 INCHES MAXIMUM IN
MATERIALSTEEL CORROSION RESISTING OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
A-41Interchangeable
interchangeable cross-reference
interchangeable
10125216Interchangeable
interchangeable cross-reference
interchangeable
ST3M455-3L10-1Interchangeable
Same NIIN cross-reference
interchangeable
11907-3L10-1Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy HT4024L3-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HT4024L3-10?
HT4024L3-10 is a SCREW,CLOSE TOLERANCE.
What parts can replace HT4024L3-10?
There are 4 known substitutes for HT4024L3-10: A-41, 10125216, ST3M455-3L10-1 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for HT4024L3-10?
HT4024L3-10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-354-4237. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HT4024L3-10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026