PartsTable
Technical Data Sheet
Download PDF

HT326-3A11 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

HT326-3A11: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL COMP H11 OVERALL, head_style: FLAT COUNTERSUNK, grip_length: 0.677 INCHES MINIMUM AND 0.697 INCHES MAXIMUM IN, grip_diameter: 0.1885 INCHES MINIMUM AND 0.1894 INCHES MAXIMUM IN, head_diameter: 0.325 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, thread_length: 0.211 INCHES MINIMUM AND 0.278 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-043-1879, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HT326-3A11
NSN: 5305-01-043-1879
FSC: 5305 — Screws
CAGE: 73197 — HI-SHEAR CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP H11 OVERALL
head_styleFLAT COUNTERSUNK
grip_length0.677 INCHES MINIMUM AND 0.697 INCHES MAXIMUM IN
thread_class3
grip_diameter0.1885 INCHES MINIMUM AND 0.1894 INCHES MAXIMUM IN
head_diameter0.325 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
thread_length0.211 INCHES MINIMUM AND 0.278 INCHES MAXIMUM IN
surface_finish32.0 MICROINCHES GRIP
fastener_length0.908 INCHES MINIMUM AND 0.955 INCHES MAXIMUM IN
hardness_rating46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
countersink_angle100.0 DEGREES NOMINAL
NSN5305-01-043-1879
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: HT326-3A11 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 32.0 MICROINCHES GRIP
•
FASTENER LENGTH: 0.908 INCHES MINIMUM AND 0.955 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: NAS 672 ASSN STD 1ST TREATMENT RESPONSE OR MIL-C-8837 TY 2 CL 2 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.211 INCHES MINIMUM AND 0.278 INCHES MAXIMUM IN
•
HARDNESS RATING: 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
TECHNICAL CHARACTERISTICS
SURFACE FINISH32.0 MICROINCHES GRIP
FASTENER LENGTH0.908 INCHES MINIMUM AND 0.955 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONNAS 672 ASSN STD 1ST TREATMENT RESPONSE OR MIL-C-8837 TY 2 CL 2 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
THREAD LENGTH0.211 INCHES MINIMUM AND 0.278 INCHES MAXIMUM IN
HARDNESS RATING46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SPECIFICATION/STANDARD DATA26512-GB510N MANUFACTURERS STANDARD
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 3
SFH22D3A11Reference document
Same NSN cross-reference
Reference document — Secondary reference
GB510N3A11Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
BM19045-3-11AReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy HT326-3A11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HT326-3A11?
HT326-3A11 is a SCREW,CLOSE TOLERANCE.
What parts can replace HT326-3A11?
There are 3 known substitutes for HT326-3A11: SFH22D3A11, GB510N3A11, BM19045-3-11A. Substitute compatibility should be verified for your specific system.
What is the NSN for HT326-3A11?
HT326-3A11 is cataloged in the U.S. Government catalog under NSN 5305-01-043-1879. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HT326-3A11

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.