PartsTable
Technical Data Sheet
Download PDF

HT2804 REF S2H 5005 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

HT2804 REF S2H 5005: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: PLASTIC, special_features: MATERIAL:ETHYLEN PRPYLENE COPOLYMER OR TERPOLYMER PER NAS1613, center_hole_diameter: 1.174 INCHES NOMINAL IN, cross-sectional_height: 0.103 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-616-8625, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HT2804 REF S2H 5005
NSN: 5331-01-616-8625
FSC: 5331 — O-ring
CAGE: U4535 — BAE SYSTEMS ELECTRONICS LIMITED DIV UNDERWATER SYSTEMS DIVISION (GBR)
SPECIFICATIONS
materialPLASTIC
special_featuresMATERIAL:ETHYLEN PRPYLENE COPOLYMER OR TERPOLYMER PER NAS1613
center_hole_diameter1.174 INCHES NOMINAL IN
cross-sectional_height0.103 INCHES NOMINAL IN
NSN5331-01-616-8625
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: HT2804 REF S2H 5005 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.103 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 1.174 INCHES NOMINAL IN
•
MATERIAL: PLASTIC
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.103 INCHES NOMINAL IN
SPECIAL FEATURESMATERIAL:ETHYLEN PRPYLENE COPOLYMER OR TERPOLYMER PER NAS1613
CENTER HOLE DIAMETER1.174 INCHES NOMINAL IN
MATERIALPLASTIC
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5331-00-001-1971 5331-00-001-1979 5331-00-001-3904 5331-00-001-3905 5331-00-001-3906 5331-00-001-3908 5331-00-001-3923 5331-00-001-3924
SUBSTITUTES & CROSS-REFERENCES 2
NAS1613Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
SAP NO 25997493Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy HT2804 REF S2H 5005?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HT2804 REF S2H 5005?
HT2804 REF S2H 5005 is a O-RING.
What parts can replace HT2804 REF S2H 5005?
There are 2 known substitutes for HT2804 REF S2H 5005: NAS1613, SAP NO 25997493. Substitute compatibility should be verified for your specific system.
What is the NSN for HT2804 REF S2H 5005?
HT2804 REF S2H 5005 is cataloged in the U.S. Government catalog under NSN 5331-01-616-8625. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HT2804 REF S2H 5005