PartsTable
Technical Data Sheet
Download PDF

HT239PB4-9 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

HT239PB4-9: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL, head_style: FLAT COUNTERSUNK, grip_length: 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN, head_diameter: 0.390 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-027-5251, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HT239PB4-9
NSN: 5305-01-027-5251
FSC: 5305 — Screws
CAGE: 73197 — HI-SHEAR CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
head_styleFLAT COUNTERSUNK
grip_length0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
head_diameter0.390 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
thread_length0.290 INCHES MINIMUM AND 0.357 INCHES MAXIMUM IN
surface_finish63.0 MICROINCHES THREADS
fastener_length0.862 INCHES MINIMUM AND 0.909 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle100.0 DEGREES NOMINAL
surface_treatmentCADMIUM AND CHROMATE OVERALL
NSN5305-01-027-5251
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: HT239PB4-9 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 63.0 MICROINCHES GRIP
•
FASTENER LENGTH: 0.862 INCHES MINIMUM AND 0.909 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.290 INCHES MINIMUM AND 0.357 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
SURFACE FINISH63.0 MICROINCHES GRIP
SURFACE FINISH63.0 MICROINCHES THREADS
FASTENER LENGTH0.862 INCHES MINIMUM AND 0.909 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.290 INCHES MINIMUM AND 0.357 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SPECIFICATION/STANDARD DATA26512-GB510L MANUFACTURERS STANDARD
GRIP LENGTH0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 2
HT8043-4-9Reference document
Same NSN cross-reference
Reference document — Secondary reference
GB510L4-9Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy HT239PB4-9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HT239PB4-9?
HT239PB4-9 is a SCREW,CLOSE TOLERANCE.
What parts can replace HT239PB4-9?
There are 2 known substitutes for HT239PB4-9: HT8043-4-9, GB510L4-9. Substitute compatibility should be verified for your specific system.
What is the NSN for HT239PB4-9?
HT239PB4-9 is cataloged in the U.S. Government catalog under NSN 5305-01-027-5251. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HT239PB4-9

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.