PartsTable
Technical Data Sheet
Download PDF

HT195-4-7 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

HT195-4-7: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: FLAT COUNTERSUNK, grip_length: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN, head_diameter: 0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-421-7888, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HT195-4-7
NSN: 5305-00-421-7888
FSC: 5305 — Screws
CAGE: 73197 — HI-SHEAR CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleFLAT COUNTERSUNK
grip_length0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
head_diameter0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
thread_length0.371 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
fastener_length0.819 INCHES MINIMUM AND 0.866 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
surface_treatmentCADMIUM OVERALL
internal_drive_styleHIGH-TORQUE
NSN5305-00-421-7888
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: HT195-4-7 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.819 INCHES MINIMUM AND 0.866 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MAC P.S.13145,FSCM 76301 MFR REF SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.371 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
GRIP LENGTH: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
•
GRIP DIAMETER: 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FASTENER LENGTH0.819 INCHES MINIMUM AND 0.866 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMAC P.S.13145,FSCM 76301 MFR REF SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.371 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
GRIP DIAMETER0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
INTERNAL DRIVE STYLEHIGH-TORQUE
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 3
3M263-4-7Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
HS2623-4Z7Reference document
Same NSN cross-reference
Reference document — Secondary reference
66117H4-7Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy HT195-4-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HT195-4-7?
HT195-4-7 is a SCREW,CLOSE TOLERANCE.
What parts can replace HT195-4-7?
There are 3 known substitutes for HT195-4-7: 3M263-4-7, HS2623-4Z7, 66117H4-7. Substitute compatibility should be verified for your specific system.
What is the NSN for HT195-4-7?
HT195-4-7 is cataloged in the U.S. Government catalog under NSN 5305-00-421-7888. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HT195-4-7

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.