HST123-10-10 — PIN-RIVET

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

HST123-10-10: PIN-RIVET.

The PIN-RIVET is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: FLUSH COUNTERSUNK, grip_length: 0.3266 INCHES MINIMUM AND 0.3276 INCHES MAXIMUM IN, shank_style: PIN-RIVET, STRAIGHT, THREADED, thread_class: 3A A, shank_diameter: 0.1270 INCHES MINIMUM AND 0.1295 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5320-01-493-8097, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

HST123-10-10

NSN: 5320-01-493-8097
FSC: 5320 — Rivets
CAGE: L4528 — LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC (CAN)

SPECIFICATIONS

material	STEEL OVERALL
head_style	FLUSH COUNTERSUNK
grip_length	0.3266 INCHES MINIMUM AND 0.3276 INCHES MAXIMUM IN
shank_style	PIN-RIVET, STRAIGHT, THREADED
thread_class	3A A
shank_diameter	0.1270 INCHES MINIMUM AND 0.1295 INCHES MAXIMUM IN
shear_strength	21070 DOUBLE POUNDS PER SQUARE INCH
fastener_length	0.3281 INCHES NOMINAL IN
special_features	108,000-180,000 PSI SHEAR(180,000 PSI TENSILE MINIMUM) PER AMS-H-6875; HI-LOK HI-TIGUE PIN, 100 DEGREE FLUSH CROWN SHEAR HEAD, ALLOY STEEL, 1/16 GRIP VARIATION- 1/64 OVS
thread_direction	RIGHT-HAND
countersink_angle	100.0 DEGREES MINIMUM
surface_treatment	CADMIUM OVERALL
NSN	5320-01-493-8097

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.1270 INCHES MINIMUM AND 0.1295 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.3281 INCHES NOMINAL IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416, TYPE II, CLASS 2, FED SPEC SINGLE TREATMENT RESPONSE OVERALL

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 OR MIL-S-6049 MIL SPEC ALL MATERIAL RESPONSES OVERALL

•

HEAD STYLE: FLUSH COUNTERSUNK

•

THREAD DIRECTION: RIGHT-HAND

•

NOMINAL THREAD SIZE: 0.3125 INCHES IN

•

GRIP LENGTH: 0.3266 INCHES MINIMUM AND 0.3276 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.1270 INCHES MINIMUM AND 0.1295 INCHES MAXIMUM IN
FASTENER LENGTH	0.3281 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416, TYPE II, CLASS 2, FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5626 OR MIL-S-6049 MIL SPEC ALL MATERIAL RESPONSES OVERALL
HEAD STYLE	FLUSH COUNTERSUNK
THREAD DIRECTION	RIGHT-HAND
NOMINAL THREAD SIZE	0.3125 INCHES IN
GRIP LENGTH	0.3266 INCHES MINIMUM AND 0.3276 INCHES MAXIMUM IN
WIDTH BETWEEN FLATS	0.160 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
SHANK STYLE	PIN-RIVET, STRAIGHT, THREADED

OTHER ITEMS IN FSC 5320 — Rivets

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5320-00-001-1756 5320-00-001-2042 5320-00-001-3944 5320-00-001-5126 5320-00-001-5151 5320-00-001-5152 5320-00-001-5153

SUBSTITUTES & CROSS-REFERENCES 1

HST123Reference document

Same NSN cross-reference

Reference document — Drawing number reference only

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy HST123-10-10?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is HST123-10-10?

HST123-10-10 is a PIN-RIVET.

What parts can replace HST123-10-10?

There is 1 known substitute for HST123-10-10: HST123. Substitute compatibility should be verified for your specific system.

What is the NSN for HST123-10-10?

HST123-10-10 is cataloged in the U.S. Government catalog under NSN 5320-01-493-8097. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

HST123-10-10 — PIN-RIVET

Request a Quote — HST123-10-10