PartsTable
Technical Data Sheet
PartsTable / COMPONENT / HSBG6-13
HSBG6-13 ✓ Verified by PartsTable
— · BALL BEARING
WHAT YOU NEED TO KNOW
2RS = sealed for life, ZZ = shielded re-greaseable ABEC grade: higher = tighter tolerance
ABEC-1 standard, ABEC-7+ for precision spindles
PRODUCT OVERVIEW

The BEARING,PLAIN,SELF-ALIGNING is a the manufacturer industrial component. Key specifications include bore_diameter: 0.3745 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN, style_designator: WITHOUT INSERT OR LINER WITH STAKING GROOVE, inner_member_width: 0.4010 INCHES MINIMUM AND 0.4060 INCHES MAXIMUM IN, outer_member_width: 0.3070 INCHES MINIMUM AND 0.3170 INCHES MAXIMUM IN, static_radial_load_rating: 6800 POUNDS LBS, outer_member_outside_diameter: 0.8120 INCHES MINIMUM AND 0.8125 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-064-2729, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HSBG6-13
NSN: 3120-00-064-2729
FSC: 3120
CAGE: 97613 — SARGENT AEROSPACE & DEFENSE, LLC DBA KAHR BEARINGS (USA)
SPECIFICATIONS
bore_diameter0.3745 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
style_designatorWITHOUT INSERT OR LINER WITH STAKING GROOVE
inner_member_width0.4010 INCHES MINIMUM AND 0.4060 INCHES MAXIMUM IN
outer_member_width0.3070 INCHES MINIMUM AND 0.3170 INCHES MAXIMUM IN
static_radial_load_rating6800 POUNDS LBS
outer_member_outside_diameter0.8120 INCHES MINIMUM AND 0.8125 INCHES MAXIMUM IN
NSN3120-00-064-2729
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: HSBG6-13 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INNER MEMBER WIDTH: 0.4010 INCHES MINIMUM AND 0.4060 INCHES MAXIMUM IN
•
STATIC RADIAL LOAD RATING: 6800 POUNDS LBS
•
STYLE DESIGNATOR: WITHOUT INSERT OR LINER WITH STAKING GROOVE
•
OUTER MEMBER OUTSIDE DIAMETER: 0.8120 INCHES MINIMUM AND 0.8125 INCHES MAXIMUM IN
•
TEST DATA DOCUMENT: 81349-MIL-B-8976 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
OUTER MEMBER WIDTH: 0.3070 INCHES MINIMUM AND 0.3170 INCHES MAXIMUM IN
•
BORE DIAMETER: 0.3745 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
INNER MEMBER WIDTH0.4010 INCHES MINIMUM AND 0.4060 INCHES MAXIMUM IN
STATIC RADIAL LOAD RATING6800 POUNDS LBS
STYLE DESIGNATORWITHOUT INSERT OR LINER WITH STAKING GROOVE
OUTER MEMBER OUTSIDE DIAMETER0.8120 INCHES MINIMUM AND 0.8125 INCHES MAXIMUM IN
TEST DATA DOCUMENT81349-MIL-B-8976 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
OUTER MEMBER WIDTH0.3070 INCHES MINIMUM AND 0.3170 INCHES MAXIMUM IN
BORE DIAMETER0.3745 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
55202Interchangeable
interchangeable cross-reference
interchangeable
A55202Interchangeable
interchangeable cross-reference
interchangeable
EHH9356Interchangeable
interchangeable cross-reference
interchangeable
05-5202Interchangeable
interchangeable cross-reference
interchangeable
J55202AInterchangeable
interchangeable cross-reference
interchangeable
GB14D6Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy HSBG6-13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HSBG6-13?
HSBG6-13 is a BEARING,PLAIN,SELF-ALIGNING.
What parts can replace HSBG6-13?
There are 9 known substitutes for HSBG6-13: 55202, A55202, EHH9356 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for HSBG6-13?
HSBG6-13 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-064-2729. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HSBG6-13

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026