PartsTable
Technical Data Sheet
Download PDF

HS804S17 ITEM 17 — RING,WIPER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

HS804S17 ITEM 17: RING,WIPER.

The RING,WIPER is a the manufacturer industrial component. Key specifications include joint_style: VERTICAL JOINT, inside_diameter: 54.0 MILLIMETERS NOMINAL MM, outside_diameter: 60.0 MILLIMETERS NOMINAL MM, material_thickness: 13.0 MILLIMETERS NOMINAL MM, cross-sectional_shape_style: PLAIN RECTANGULAR, STRAIGHT FACE. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-351-2627, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HS804S17 ITEM 17
NSN: 5330-01-351-2627
FSC: 5330 — Packing and Gasket Materials
CAGE: 1CC45 — MAC GREGOR USA INC (USA)
SPECIFICATIONS
joint_styleVERTICAL JOINT
inside_diameter54.0 MILLIMETERS NOMINAL MM
outside_diameter60.0 MILLIMETERS NOMINAL MM
material_thickness13.0 MILLIMETERS NOMINAL MM
cross-sectional_shape_stylePLAIN RECTANGULAR, STRAIGHT FACE
NSN5330-01-351-2627
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: HS804S17 ITEM 17 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: PLAIN RECTANGULAR, STRAIGHT FACE
•
OUTSIDE DIAMETER: 60.0 MILLIMETERS NOMINAL MM
•
JOINT STYLE: VERTICAL JOINT
•
MATERIAL THICKNESS: 13.0 MILLIMETERS NOMINAL MM
•
INSIDE DIAMETER: 54.0 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL SHAPE STYLEPLAIN RECTANGULAR, STRAIGHT FACE
OUTSIDE DIAMETER60.0 MILLIMETERS NOMINAL MM
JOINT STYLEVERTICAL JOINT
MATERIAL THICKNESS13.0 MILLIMETERS NOMINAL MM
INSIDE DIAMETER54.0 MILLIMETERS NOMINAL MM
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
E/PWR60/54X13Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy HS804S17 ITEM 17?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HS804S17 ITEM 17?
HS804S17 ITEM 17 is a RING,WIPER.
What parts can replace HS804S17 ITEM 17?
There is 1 known substitute for HS804S17 ITEM 17: E/PWR60/54X13. Substitute compatibility should be verified for your specific system.
What is the NSN for HS804S17 ITEM 17?
HS804S17 ITEM 17 is cataloged in the U.S. Government catalog under NSN 5330-01-351-2627. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HS804S17 ITEM 17