PartsTable
Technical Data Sheet
Download PDF

HS6076-05 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

HS6076-05: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024 BAND, temp_rating: -65.0 FAHRENHEIT AND 275.00 FAHRENHEIT DEGF, overall_width: 0.685 INCHES NOMINAL IN, supplementary_features: DIAMETER OF 1ST HOLE: 0.180", DIAMETER OF 2ND HOLE: 0.340", end_item_identification: APACHE HELICOPTER, material_document_and_classification: AMS-QQ-A-250/5 ASSN STD SINGLE MATERIAL RESPONSE BAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-572-5974, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HS6076-05
NSN: 5340-01-572-5974
FSC: 5340 — Hardware, Commercial
CAGE: 84971 — TA AEROSPACE CO DIV TA AEROSPACE (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024 BAND
temp_rating-65.0 FAHRENHEIT AND 275.00 FAHRENHEIT DEGF
overall_width0.685 INCHES NOMINAL IN
supplementary_featuresDIAMETER OF 1ST HOLE: 0.180", DIAMETER OF 2ND HOLE: 0.340"
end_item_identificationAPACHE HELICOPTER
material_document_and_classificationAMS-QQ-A-250/5 ASSN STD SINGLE MATERIAL RESPONSE BAND
part_name_assigned_by_controlling_agencyCLAMP,LOOP,ASSEMBLY,TWO HOLES
center_to_center_distance_between_first_and_second_holes0.536 INCHES NOMINAL IN
NSN5340-01-572-5974
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: HS6076-05 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 275.00 FAHRENHEIT DEGF
•
SUPPLEMENTARY FEATURES: DIAMETER OF 1ST HOLE: 0.180", DIAMETER OF 2ND HOLE: 0.340"
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS-QQ-A-250/5 ASSN STD SINGLE MATERIAL RESPONSE BAND
•
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES: 0.536 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
TEMP RATING-65.0 FAHRENHEIT AND 275.00 FAHRENHEIT DEGF
SUPPLEMENTARY FEATURESDIAMETER OF 1ST HOLE: 0.180", DIAMETER OF 2ND HOLE: 0.340"
MATERIAL DOCUMENT AND CLASSIFICATIONAMS-QQ-A-250/5 ASSN STD SINGLE MATERIAL RESPONSE BAND
OVERALL WIDTH0.685 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES0.536 INCHES NOMINAL IN
SPECIAL FEATURESCLAMP BAND: ALUMINUM ALLOY 2024-0 PER AMS-QQ-A-250/5, HEAT TREAT CONDITION T42 PER AMS-H-6088, CUSHION INSERT: NITRILE BUTADIENE PER MIL-C-85052/1,COLOR YELLOW; FINISH: CLAMP BAND CHEMICAL FILM PER MIL-C-5541,CLASS 1A, CUSHION INSERT: NONE A
PART NAME ASSIGNED BY CONTROLLING AGENCYCLAMP,LOOP,ASSEMBLY,TWO HOLES
END ITEM IDENTIFICATIONAPACHE HELICOPTER
MATERIALALUMINUM ALLOY 2024 BAND
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 3
5725974Reference document
Same NSN cross-reference
Reference document — Secondary reference
TA027083-05Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
TA027082-05Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandDemilitarization required — critical (Q)
Ready to buy HS6076-05?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HS6076-05?
HS6076-05 is a CLAMP,LOOP.
What parts can replace HS6076-05?
There are 3 known substitutes for HS6076-05: 5725974, TA027083-05, TA027082-05. Substitute compatibility should be verified for your specific system.
What is the NSN for HS6076-05?
HS6076-05 is cataloged in the U.S. Government catalog under NSN 5340-01-572-5974. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HS6076-05