The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL COMP 321 BAND, surface_treatment: PASSIVATE BAND, material_document_and_classification: AMS 5510, ANNEALED ASSN STD SINGLE MATERIAL RESPONSE BAND, part_name_assigned_by_controlling_agency: CLAMP, SADDLE. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-574-7418, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
HS6012-16
NSN:5340-01-574-7418 FSC:5340 — Hardware, Commercial CAGE:8V613 — THE BOEING COMPANY (USA)
SPECIFICATIONS
material
STEEL COMP 321 BAND
special_features
DIAMETER-.50 TO 1.25 INCHES; CLAMP BANDS-PASSIVATE PER QQ-P-35, CLASS V; CLAMP BANDS SHALL BE DEBURRED; FABRIC SUPPORTED SILICONE, HARDNESS OF 60 SHORE A, MINIMUM IN
surface_treatment
PASSIVATE BAND
material_document_and_classification
AMS 5510, ANNEALED ASSN STD SINGLE MATERIAL RESPONSE BAND
part_name_assigned_by_controlling_agency
CLAMP, SADDLE
NSN
5340-01-574-7418
COMPONENT DIAGRAM
KEY FEATURES
•
SUPPLEMENTARY FEATURES: MAJOR SUBSTRATE TO BE ROCKWELL 3ON:58.5 MIN; PROCESS,MACHINE,STRESS RELIEVE AND ELECTROLESS NICKEL PLATE ALL OVER 0.004 TO 0.006 POLISH OPTICAL SURFACE TO WITHIN 1/8 WAVE OF SODIUM LIGHT AFTER BEING SUBJECTED TO TEM CYCLING 3 TIMES BETWEEN MINUS 62 DEG C AND 85 DEG C 15 MINUTES MIN AT EACH TEMPERATURE EXTREME; MAKE FROM HONEYWELL PART NUMBER 21008165-101 DEGC
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5510, ANNEALED ASSN STD SINGLE MATERIAL RESPONSE BAND
•
SURFACE TREATMENT: PASSIVATE BAND
•
MATERIAL: STEEL COMP 321 BAND
TECHNICAL CHARACTERISTICS
SUPPLEMENTARY FEATURES
MAJOR SUBSTRATE TO BE ROCKWELL 3ON:58.5 MIN; PROCESS,MACHINE,STRESS RELIEVE AND ELECTROLESS NICKEL PLATE ALL OVER 0.004 TO 0.006 POLISH OPTICAL SURFACE TO WITHIN 1/8 WAVE OF SODIUM LIGHT AFTER BEING SUBJECTED TO TEM CYCLING 3 TIMES BETWEEN MINUS 62 DEG C AND 85 DEG C 15 MINUTES MIN AT EACH TEMPERATURE EXTREME; MAKE FROM HONEYWELL PART NUMBER 21008165-101 DEGC
MATERIAL DOCUMENT AND CLASSIFICATION
AMS 5510, ANNEALED ASSN STD SINGLE MATERIAL RESPONSE BAND
SPECIAL FEATURES
DIAMETER-.50 TO 1.25 INCHES; CLAMP BANDS-PASSIVATE PER QQ-P-35, CLASS V; CLAMP BANDS SHALL BE DEBURRED; FABRIC SUPPORTED SILICONE, HARDNESS OF 60 SHORE A, MINIMUM IN
SURFACE TREATMENT
PASSIVATE BAND
PART NAME ASSIGNED BY CONTROLLING AGENCY
CLAMP, SADDLE
MATERIAL
STEEL COMP 321 BAND
MATERIAL
RUBBER SILICONE CUSHION
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HS6012-16?
HS6012-16 is a CLAMP,LOOP.
What parts can replace HS6012-16?
There is 1 known substitute for HS6012-16: HS6012-12. Substitute compatibility should be verified for your specific system.
What is the NSN for HS6012-16?
HS6012-16 is cataloged in the U.S. Government catalog under NSN 5340-01-574-7418. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.