PartsTable
Technical Data Sheet
Download PDF

HS5285-1032 — NUT,PLAIN,PLATE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

HS5285-1032: NUT,PLAIN,PLATE.

The NUT,PLAIN,PLATE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1010 OVERALL, nut_style: PLATE, nut_height: 0.331 INCHES NOMINAL IN, plate_width: 0.750 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNF. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-181-9327, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HS5285-1032
NSN: 5310-01-181-9327
FSC: 5310 — Nuts and Washers
CAGE: 3A054 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
materialSTEEL COMP 1010 OVERALL
nut_stylePLATE
nut_height0.331 INCHES NOMINAL IN
plate_width0.750 INCHES NOMINAL IN
thread_class2B
thread_seriesUNF
plate_thickness0.035 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN
special_featuresTHREE GRIPPING PRONGS
thread_directionRIGHT-HAND
surface_treatmentZINC OVERALL
nominal_thread_size0.190 INCHES IN
thread_quantity_per_inch32
NSN5310-01-181-9327
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: HS5285-1032 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PLATE THICKNESS: 0.035 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN
•
THREAD SERIES: UNF
•
PLATE WIDTH: 0.750 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
NUT HEIGHT: 0.331 INCHES NOMINAL IN
•
SURFACE TREATMENT: ZINC OVERALL
TECHNICAL CHARACTERISTICS
PLATE THICKNESS0.035 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN
THREAD SERIESUNF
PLATE WIDTH0.750 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
NUT HEIGHT0.331 INCHES NOMINAL IN
SPECIAL FEATURESTHREE GRIPPING PRONGS
SURFACE TREATMENTZINC OVERALL
NUT STYLEPLATE
THREAD CLASS2B
SUBSTITUTES & CROSS-REFERENCES 2
SS-58077Reference document
Same NSN cross-reference
Reference document — Secondary reference
90975A023Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy HS5285-1032?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HS5285-1032?
HS5285-1032 is a NUT,PLAIN,PLATE.
What parts can replace HS5285-1032?
There are 2 known substitutes for HS5285-1032: SS-58077, 90975A023. Substitute compatibility should be verified for your specific system.
What is the NSN for HS5285-1032?
HS5285-1032 is cataloged in the U.S. Government catalog under NSN 5310-01-181-9327. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HS5285-1032

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.