HS4483-61S — SPACER,SLEEVE

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

HS4483-61S: SPACER,SLEEVE.

The SPACER,SLEEVE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061 OVERALL, corner_shape: SQUARE ALL CORNERS, flange_width: 0.0910 INCHES NOMINAL IN, overall_length: 0.1450 INCHES MINIMUM AND 0.1550 INCHES MAXIMUM IN, style_designator: SOLID, EXTERNAL FLANGE ONE END, surface_treatment: CHROMATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5365-00-284-2051, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

HS4483-61S

NSN: 5365-00-284-2051
FSC: 5365 — Bushings, Rings, Shims, and Spacers
CAGE: 8V613 — THE BOEING COMPANY (USA)

SPECIFICATIONS

material	ALUMINUM ALLOY 6061 OVERALL
corner_shape	SQUARE ALL CORNERS
flange_width	0.0910 INCHES NOMINAL IN
overall_length	0.1450 INCHES MINIMUM AND 0.1550 INCHES MAXIMUM IN
style_designator	SOLID, EXTERNAL FLANGE ONE END
surface_treatment	CHROMATE OVERALL
body_inside_diameter	0.1920 INCHES MINIMUM AND 0.2020 INCHES MAXIMUM IN
body_outside_diameter	0.3200 INCHES MINIMUM AND 0.3300 INCHES MAXIMUM IN
flange_outside_diameter	0.9750 INCHES MINIMUM AND 1.0100 INCHES MAXIMUM IN
material_document_and_classification	MIL-A-12545,TEMPER T6 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classification	MIL-C-5541,CLASS 1A.OR CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL A
NSN	5365-00-284-2051

COMPONENT DIAGRAM

KEY FEATURES

•

CORNER SHAPE: SQUARE ALL CORNERS

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541,CLASS 1A.OR CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL A

•

FLANGE OUTSIDE DIAMETER: 0.9750 INCHES MINIMUM AND 1.0100 INCHES MAXIMUM IN

•

BODY OUTSIDE DIAMETER: 0.3200 INCHES MINIMUM AND 0.3300 INCHES MAXIMUM IN

•

STYLE DESIGNATOR: SOLID, EXTERNAL FLANGE ONE END

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-A-12545,TEMPER T6 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL

•

BODY INSIDE DIAMETER: 0.1920 INCHES MINIMUM AND 0.2020 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

CORNER SHAPE	SQUARE ALL CORNERS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-5541,CLASS 1A.OR CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL A
FLANGE OUTSIDE DIAMETER	0.9750 INCHES MINIMUM AND 1.0100 INCHES MAXIMUM IN
BODY OUTSIDE DIAMETER	0.3200 INCHES MINIMUM AND 0.3300 INCHES MAXIMUM IN
STYLE DESIGNATOR	SOLID, EXTERNAL FLANGE ONE END
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-A-12545,TEMPER T6 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH	0.1450 INCHES MINIMUM AND 0.1550 INCHES MAXIMUM IN
BODY INSIDE DIAMETER	0.1920 INCHES MINIMUM AND 0.2020 INCHES MAXIMUM IN
SPECIAL FEATURES	ELONGATED FLANGE 0.9850 INCHES NOMINAL LONG,0.3960 INCHES NOMINAL WIDE,TWO BOLT HOLES 0.0980 INCHES NOMINAL DIAMETER LOCATED 0.3430 INCHES NOMINAL FROM CENTER OF INSIDE DIAMETER TO CENTER OF BOLT HOLE EITHER END IN
SURFACE TREATMENT	CHROMATE OVERALL

SUBSTITUTES & CROSS-REFERENCES 4

10118473Reference document

Same NSN cross-reference

Reference document — Informative reference only

HS4483-615Reference document

Same NSN cross-reference

Reference document — Secondary reference

WSI10-15Reference document

Same NSN cross-reference

Reference document — Secondary reference

SL2609-3-15Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy HS4483-61S?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is HS4483-61S?

HS4483-61S is a SPACER,SLEEVE.

What parts can replace HS4483-61S?

There are 4 known substitutes for HS4483-61S: 10118473, HS4483-615, WSI10-15 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for HS4483-61S?

HS4483-61S is cataloged in the U.S. Government catalog under NSN 5365-00-284-2051. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

HS4483-61S — SPACER,SLEEVE

Request a Quote — HS4483-61S