PartsTable
Technical Data Sheet
Download PDF

HS360SS — STRIKE,CATCH

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

HS360SS: STRIKE,CATCH.

The STRIKE,CATCH is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, tongue_width: 0.9375 INCHES NOMINAL IN, overall_width: 0.7656 INCHES NOMINAL IN, overall_length: 1.4375 INCHES NOMINAL IN, style_designator: MORTISE, surface_treatment: UNABLE TO DECODE. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-003-1704, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HS360SS
NSN: 5340-00-003-1704
FSC: 5340 — Hardware, Commercial
CAGE: 1RRL5 — NIELSEN HARDWARE CORPORATION (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
tongue_width0.9375 INCHES NOMINAL IN
hole_quantity2
overall_width0.7656 INCHES NOMINAL IN
overall_length1.4375 INCHES NOMINAL IN
style_designatorMORTISE
surface_treatmentUNABLE TO DECODE
material_thickness0.0620 INCHES NOMINAL IN
mounting_hole_diameter0.1300 INCHES NOMINAL IN
surface_treatment_document_and_classificationUNABLE TO DECODE
NSN5340-00-003-1704
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: HS360SS MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TONGUE WIDTH: 0.9375 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: UNABLE TO DECODE
•
STYLE DESIGNATOR: MORTISE
•
MOUNTING HOLE DIAMETER: 0.1300 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.0620 INCHES NOMINAL IN
•
SURFACE TREATMENT: UNABLE TO DECODE
TECHNICAL CHARACTERISTICS
TONGUE WIDTH0.9375 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONUNABLE TO DECODE
STYLE DESIGNATORMORTISE
MOUNTING HOLE DIAMETER0.1300 INCHES NOMINAL IN
OVERALL LENGTH1.4375 INCHES NOMINAL IN
OVERALL WIDTH0.7656 INCHES NOMINAL IN
MATERIAL THICKNESS0.0620 INCHES NOMINAL IN
SURFACE TREATMENTUNABLE TO DECODE
MATERIALUNABLE TO DECODE
HOLE QUANTITY2
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-003-0832 5340-00-003-1792 5340-00-003-1794 5340-00-003-1909 5340-00-003-5082 5340-00-003-5083 5340-00-003-5434 5340-00-003-5993
SUBSTITUTES & CROSS-REFERENCES 3
483720-2Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
B1900&335Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
ES3179-203Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy HS360SS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HS360SS?
HS360SS is a STRIKE,CATCH.
What parts can replace HS360SS?
There are 3 known substitutes for HS360SS: 483720-2, B1900&335, ES3179-203. Substitute compatibility should be verified for your specific system.
What is the NSN for HS360SS?
HS360SS is cataloged in the U.S. Government catalog under NSN 5340-00-003-1704. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HS360SS

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.