PartsTable
Technical Data Sheet
Download PDF

HS3017-F10S — WASHER,SHOULDERED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

HS3017-F10S: WASHER,SHOULDERED.

The WASHER,SHOULDERED is a the manufacturer industrial component. Key specifications include material: CELLULOSE OVERALL, hole_diameter: 0.195 INCHES NOMINAL IN, shoulder_height: 0.031 INCHES NOMINAL IN, outside_diameter: 0.375 INCHES NOMINAL IN, style_designator: SHOULDERED, shoulder_diameter: 0.308 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-851-3214, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HS3017-F10S
NSN: 5310-00-851-3214
FSC: 5310 — Nuts and Washers
CAGE: 8V613 — THE BOEING COMPANY (USA)
SPECIFICATIONS
materialCELLULOSE OVERALL
hole_diameter0.195 INCHES NOMINAL IN
shoulder_height0.031 INCHES NOMINAL IN
outside_diameter0.375 INCHES NOMINAL IN
style_designatorSHOULDERED
shoulder_diameter0.308 INCHES NOMINAL IN
material_thickness0.062 INCHES NOMINAL IN
NSN5310-00-851-3214
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: HS3017-F10S · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHOULDER HEIGHT: 0.031 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SHOULDERED
•
OUTSIDE DIAMETER: 0.375 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.062 INCHES NOMINAL IN
•
SHOULDER DIAMETER: 0.308 INCHES NOMINAL IN
•
MATERIAL: CELLULOSE OVERALL
•
HOLE DIAMETER: 0.195 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SHOULDER HEIGHT0.031 INCHES NOMINAL IN
STYLE DESIGNATORSHOULDERED
OUTSIDE DIAMETER0.375 INCHES NOMINAL IN
MATERIAL THICKNESS0.062 INCHES NOMINAL IN
SHOULDER DIAMETER0.308 INCHES NOMINAL IN
MATERIALCELLULOSE OVERALL
HOLE DIAMETER0.195 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 7
4702Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5310PL1280314Reference document
Same NSN cross-reference
Reference document — Informative reference only
619610-7Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
10015465-008Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
503-031Reference document
Same NSN cross-reference
Reference document — Secondary reference
2156Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy HS3017-F10S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HS3017-F10S?
HS3017-F10S is a WASHER,SHOULDERED.
What parts can replace HS3017-F10S?
There are 7 known substitutes for HS3017-F10S: 4702, 5310PL1280314, 619610-7 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for HS3017-F10S?
HS3017-F10S is cataloged in the U.S. Government catalog under NSN 5310-00-851-3214. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HS3017-F10S