PartsTable
Technical Data Sheet
Download PDF

HS2623-5Z8 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

HS2623-5Z8: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL COMP H11 OVERALL, head_style: FLAT COUNTERSUNK, grip_length: 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN, head_diameter: 0.625 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-242-9124, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HS2623-5Z8
NSN: 5305-00-242-9124
NIINs: 002429124, 008911726
FSC: 5305 — Screws
CAGE: 17446 — HUCK INTERNATIONAL, INC (USA)
SPECIFICATIONS
materialSTEEL COMP H11 OVERALL
head_styleFLAT COUNTERSUNK
grip_length0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
head_diameter0.625 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
thread_length0.441 INCHES MINIMUM AND 0.508 INCHES MAXIMUM IN
fastener_length1.013 INCHES MINIMUM AND 1.060 INCHES MAXIMUM IN
hardness_rating46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
surface_treatmentCADMIUM AND CHROMATE OVERALL
NSN5305-00-242-9124
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: HS2623-5Z8 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.951 INCHES MINIMUM AND 0.998 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: 13145 FSCM 76301 MFR REF SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.441 INCHES MINIMUM AND 0.508 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 23-105 FSCM 76301 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
GRIP LENGTH: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FASTENER LENGTH0.951 INCHES MINIMUM AND 0.998 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION13145 FSCM 76301 MFR REF SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.441 INCHES MINIMUM AND 0.508 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION23-105 FSCM 76301 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.312 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
GRIP DIAMETER0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
SUBSTITUTES & CROSS-REFERENCES 5
642AS1004-5Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
HT195-5-8Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
HT8115-5-8Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
3M263-5-8Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
123840-5-8Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy HS2623-5Z8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HS2623-5Z8?
HS2623-5Z8 is a SCREW,CLOSE TOLERANCE.
What parts can replace HS2623-5Z8?
There are 5 known substitutes for HS2623-5Z8: 642AS1004-5, HT195-5-8, HT8115-5-8 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for HS2623-5Z8?
HS2623-5Z8 is cataloged in the U.S. Government catalog under NSN 5305-00-242-9124. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HS2623-5Z8