HS23A5-3-5 — PIN-RIVET

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

HS23A5-3-5: PIN-RIVET.

The PIN-RIVET is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 7075 OVERALL, head_style: FLUSH COUNTERSUNK, grip_length: 0.219 INCHES MAXIMUM IN, heat_treatment: T-6 SOLUTION HEAT TREATED OVERALL, shank_diameter: 0.1545 INCHES MINIMUM AND 0.1555 INCHES MAXIMUM IN, countersink_angle: 100.0 DEGREES NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5320-00-173-8646, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

HS23A5-3-5

NSN: 5320-00-173-8646
FSC: 5320 — Rivets
CAGE: 81992 — HUBBELL HARVEY INC KELLEMS DIV (USA)

SPECIFICATIONS

material	ALUMINUM ALLOY 7075 OVERALL
head_style	FLUSH COUNTERSUNK
grip_length	0.219 INCHES MAXIMUM IN
heat_treatment	T-6 SOLUTION HEAT TREATED OVERALL
shank_diameter	0.1545 INCHES MINIMUM AND 0.1555 INCHES MAXIMUM IN
countersink_angle	100.0 DEGREES NOMINAL
surface_treatment	ANODIZE AND CHROMATE OVERALL
width_across_flats	0.249 INCHES NOMINAL IN
head_major_diameter	0.254 INCHES NOMINAL IN
material_document_and_classification	QQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classification	MIL-A-8625,TYPE 2,CLASS1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN	5320-00-173-8646

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.1545 INCHES MINIMUM AND 0.1555 INCHES MAXIMUM IN

•

WIDTH ACROSS FLATS: 0.249 INCHES NOMINAL IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TYPE 2,CLASS1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL

•

HEAT TREATMENT: T-6 SOLUTION HEAT TREATED OVERALL

•

MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL

•

HEAD STYLE: FLUSH COUNTERSUNK

•

GRIP LENGTH: 0.219 INCHES MAXIMUM IN

•

SURFACE TREATMENT: ANODIZE AND CHROMATE OVERALL

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.1545 INCHES MINIMUM AND 0.1555 INCHES MAXIMUM IN
WIDTH ACROSS FLATS	0.249 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625,TYPE 2,CLASS1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
HEAT TREATMENT	T-6 SOLUTION HEAT TREATED OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
HEAD STYLE	FLUSH COUNTERSUNK
GRIP LENGTH	0.219 INCHES MAXIMUM IN
SURFACE TREATMENT	ANODIZE AND CHROMATE OVERALL
COUNTERSINK ANGLE	100.0 DEGREES NOMINAL
MATERIAL	ALUMINUM ALLOY 7075 OVERALL

OTHER ITEMS IN FSC 5320 — Rivets

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5320-00-001-1756 5320-00-001-2042 5320-00-001-3944 5320-00-001-5126 5320-00-001-5151 5320-00-001-5152 5320-00-001-5153

SUBSTITUTES & CROSS-REFERENCES 1

3M90A5-3-5Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required

Ready to buy HS23A5-3-5?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is HS23A5-3-5?

HS23A5-3-5 is a PIN-RIVET.

What parts can replace HS23A5-3-5?

There is 1 known substitute for HS23A5-3-5: 3M90A5-3-5. Substitute compatibility should be verified for your specific system.

What is the NSN for HS23A5-3-5?

HS23A5-3-5 is cataloged in the U.S. Government catalog under NSN 5320-00-173-8646. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

HS23A5-3-5 — PIN-RIVET

Request a Quote — HS23A5-3-5