PartsTable
Technical Data Sheet
PartsTable / COMPONENT / HS106
HS106 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The TIP,ELECTRIC SOLDERING IRON is a the manufacturer industrial component. Key specifications include cushion: NOT INCLUDED, material: COPPER ALLOY, tip_type: STRAIGHT, tip_width: 0.190 INCHES NOMINAL IN, body_style: ROUND, tip_end_style: SCREWDRIVER. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-339-0312, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HS106
NSN: 5340-00-339-0312
FSC: 5340
CAGE: 99816 — STEEL CITY CORP THE (USA)
SPECIFICATIONS
cushionNOT INCLUDED
materialCOPPER ALLOY
tip_typeSTRAIGHT
tip_width0.190 INCHES NOMINAL IN
body_styleROUND
tip_end_styleSCREWDRIVER
overall_length1.000 INCHES NOMINAL IN
mounting_methodPRESS FIT
surface_treatmentIRON
tiplet_accommodationNOT INCLUDED
mounting_end_diameter0.250 INCHES NOMINAL IN
end_item_identificationFOR IN-LINE FILTER PART NO DF30-ID3-MS USED ON MAGNA 2 PLATE MONOCOLOR INTAGLIO PRESS SERIAL NO LG 11 (69) 0545
NSN5340-00-339-0312
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: HS106 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE DIAMETER/ARCH LENGTH: 2.000 INCHES NOMINAL IN
•
MATERIAL: STEEL LOCATION NOT OTHERWISE SPECIFIED
•
CUSHION: NOT INCLUDED
TECHNICAL CHARACTERISTICS (FLIS)
INSIDE DIAMETER/ARCH LENGTH2.000 INCHES NOMINAL IN
MATERIALSTEEL LOCATION NOT OTHERWISE SPECIFIED
CUSHIONNOT INCLUDED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
1338Interchangeable
interchangeable cross-reference
interchangeable
ST4538Interchangeable
interchangeable cross-reference
interchangeable
4Q438Interchangeable
interchangeable cross-reference
interchangeable
001338Interchangeable
interchangeable cross-reference
interchangeable
ORH13-908Interchangeable
interchangeable cross-reference
interchangeable
0R908Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy HS106?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HS106?
HS106 is a TIP,ELECTRIC SOLDERING IRON.
What parts can replace HS106?
There are 21 known substitutes for HS106: 1338, ST4538, 4Q438 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for HS106?
HS106 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-339-0312. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HS106

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026