HS10-40OHMPORM1PCT-2PPM — RESISTOR,FIXED,WIRE WOUND,INDUCT

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

HS10-40OHMPORM1PCT-2PPM: RESISTOR,FIXED,WIRE WOUND,INDUCT.

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include body_width: 0.420 INCHES NOMINAL IN, body_height: 0.400 INCHES NOMINAL IN, body_length: 0.750 INCHES NOMINAL IN, cubic_measure: 0.126 CUBIC INCHES, terminal_type: TAB, SOLDER LUG, inclosure_type: ENCASED. This part is cataloged in the U.S.

Government catalog under NSN 5905-01-161-3182, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ HS10-40OHMPORM1PCT-2PPM

NSN: 5905-01-161-3182
FSC: 5905 — Resistor
CAGE: 20940 — MICRO-OHM CORPORATION (USA)

SPECIFICATIONS

body_width	0.420 INCHES NOMINAL IN
body_height	0.400 INCHES NOMINAL IN
body_length	0.750 INCHES NOMINAL IN
cubic_measure	0.126 CUBIC INCHES
terminal_type	TAB, SOLDER LUG
inclosure_type	ENCASED
terminal_width	0.140 INCHES NOMINAL IN
terminal_length	0.650 INCHES NOMINAL IN
style_designator	AXIAL TERMINAL (S)
mounting_hole_size	0.094 INCHES NOMINAL IN
electrical_resistance	40.000 OHMS
reliability_indicator	NOT ESTABLISHED
NSN	5905-01-161-3182

COMPONENT DIAGRAM

KEY FEATURES

•

RESISTANCE TOLERANCE IN PERCENT: -1.000 TO 1.000

•

TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS: -2.0 TO 2.0

•

ELECTRICAL RESISTANCE: 40.000 OHMS

•

INCLOSURE TYPE: ENCASED

•

MOUNTING HOLE SIZE: 0.094 INCHES NOMINAL IN

•

TERMINAL TYPE: TAB, SOLDER LUG

•

DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH: 0.560 INCHES NOMINAL IN

•

TERMINAL LENGTH: 0.650 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

RESISTANCE TOLERANCE IN PERCENT	-1.000 TO 1.000
TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS	-2.0 TO 2.0
ELECTRICAL RESISTANCE	40.000 OHMS
INCLOSURE TYPE	ENCASED
MOUNTING HOLE SIZE	0.094 INCHES NOMINAL IN
TERMINAL TYPE	TAB, SOLDER LUG
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH	0.560 INCHES NOMINAL IN
TERMINAL LENGTH	0.650 INCHES NOMINAL IN
BODY WIDTH	0.420 INCHES NOMINAL IN
BODY HEIGHT	0.400 INCHES NOMINAL IN

OTHER ITEMS IN FSC 5905 — Resistor

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5905-00-000-0136 5905-00-000-0488 5905-00-000-8809 5905-00-000-8833 5905-00-000-9526 5905-00-001-1342 5905-00-001-1573 5905-00-001-2059

SUBSTITUTES & CROSS-REFERENCES 2

0811-3409Reference document

Same NSN cross-reference

Reference document — Secondary reference

HT10-40OHMPORM1PCT-2PPMReference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy HS10-40OHMPORM1PCT-2PPM?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is HS10-40OHMPORM1PCT-2PPM?

HS10-40OHMPORM1PCT-2PPM is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).

What parts can replace HS10-40OHMPORM1PCT-2PPM?

There are 2 known substitutes for HS10-40OHMPORM1PCT-2PPM: 0811-3409, HT10-40OHMPORM1PCT-2PPM. Substitute compatibility should be verified for your specific system.

What is the NSN for HS10-40OHMPORM1PCT-2PPM?

HS10-40OHMPORM1PCT-2PPM is cataloged in the U.S. Government catalog under NSN 5905-01-161-3182. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

HS10-40OHMPORM1PCT-2PPM — RESISTOR,FIXED,WIRE WOUND,INDUCT

Request a Quote — HS10-40OHMPORM1PCT-2PPM