HR3522-4-02 — RIVET,BLIND

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

HR3522-4-02: RIVET,BLIND.

The RIVET,BLIND is a the manufacturer industrial component. Key specifications include material: NICKEL SLEEVE, head_style: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER), grip_length: 0.125 INCHES MAXIMUM IN, shank_style: SELF-PLUGGING MECHANICALLY LOCKED STEM, shank_diameter: 0.125 INCHES MINIMUM AND 0.129 INCHES MAXIMUM IN, fastener_length: 0.182 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5320-01-379-2399, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

HR3522-4-02

NSN: 5320-01-379-2399
FSC: 5320 — Rivets
CAGE: 0HDW7 — HUCK INTERNATIONAL, INC. DIV HUCK PRODUCTS DIVISION (USA)

SPECIFICATIONS

material	NICKEL SLEEVE
head_style	FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
grip_length	0.125 INCHES MAXIMUM IN
shank_style	SELF-PLUGGING MECHANICALLY LOCKED STEM
shank_diameter	0.125 INCHES MINIMUM AND 0.129 INCHES MAXIMUM IN
fastener_length	0.182 INCHES NOMINAL IN
countersink_angle	100.0 DEGREES NOMINAL
head_major_diameter	0.229 INCHES MAXIMUM IN
specification/standard_data	81349-MIL-R-7885/5 GOVERNMENT SPECIFICATION
NSN	5320-01-379-2399

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.125 INCHES MINIMUM AND 0.129 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.182 INCHES NOMINAL IN

•

HEAD STYLE: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)

•

SPECIFICATION/STANDARD DATA: 81349-MIL-R-7885/5 GOVERNMENT SPECIFICATION

•

GRIP LENGTH: 0.125 INCHES MAXIMUM IN

•

SHANK STYLE: SELF-PLUGGING MECHANICALLY LOCKED STEM

•

COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL

•

TEST DATA DOCUMENT: 81349-MIL-R-7885 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.125 INCHES MINIMUM AND 0.129 INCHES MAXIMUM IN
FASTENER LENGTH	0.182 INCHES NOMINAL IN
HEAD STYLE	FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
SPECIFICATION/STANDARD DATA	81349-MIL-R-7885/5 GOVERNMENT SPECIFICATION
GRIP LENGTH	0.125 INCHES MAXIMUM IN
SHANK STYLE	SELF-PLUGGING MECHANICALLY LOCKED STEM
COUNTERSINK ANGLE	100.0 DEGREES NOMINAL
TEST DATA DOCUMENT	81349-MIL-R-7885 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
MATERIAL	NICKEL SLEEVE
HEAD MAJOR DIAMETER	0.229 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 2

MIL-R-7885/5Reference document

Same NSN cross-reference

Reference document — Identification reference

M7885/5-4-02Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy HR3522-4-02?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is HR3522-4-02?

HR3522-4-02 is a RIVET,BLIND.

What parts can replace HR3522-4-02?

There are 2 known substitutes for HR3522-4-02: MIL-R-7885/5, M7885/5-4-02. Substitute compatibility should be verified for your specific system.

What is the NSN for HR3522-4-02?

HR3522-4-02 is cataloged in the U.S. Government catalog under NSN 5320-01-379-2399. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

HR3522-4-02 — RIVET,BLIND

Request a Quote — HR3522-4-02