PartsTable
Technical Data Sheet
Download PDF

HR2T12-138 — HOSE ASSEMBLY,NONMETALLIC

✓ Government record, cited
— · PIPE SECTION
PRODUCT OVERVIEW

HR2T12-138: HOSE ASSEMBLY,NONMETALLIC.

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 30.0 DEGREES FIRST END, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, connection_type: THREADED EXTERNAL PIPE FIRST END, inside_diameter: 0.750 INCHES NOMINAL IN, connection_style: INVERTED FLARE FIRST END, outside_diameter: 1.190 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 4720-01-416-3254, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HR2T12-138
NSN: 4720-01-416-3254
FSC: 4720 — Hose and Flexible Tubing
CAGE: 0NAG9 — LOWE MANUFACTURING CO., LLC DBA LOWE MANUFACTURING CO INC (USA)
SPECIFICATIONS
seat_angle30.0 DEGREES FIRST END
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
connection_typeTHREADED EXTERNAL PIPE FIRST END
inside_diameter0.750 INCHES NOMINAL IN
connection_styleINVERTED FLARE FIRST END
outside_diameter1.190 INCHES MAXIMUM IN
thread_directionRIGHT-HAND FIRST END
operating_pressure2250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure9000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size0.750 INCHES FIRST END IN
end_connection_designSTRAIGHT FIRST END
end_item_identification2590-01-384-6857
NSN4720-01-416-3254
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: HR2T12-138 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MEASURING METHOD AND LENGTH: 138.000 INCHES NOMINAL OVERALL IN
•
TEMP RATING: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
MINIMUM INSIDE BENDING RADIUS: 9.500 INCHES IN
•
CONNECTION STYLE: INVERTED FLARE FIRST END
•
END CONNECTION DESIGN: STRAIGHT FIRST END
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED WIRE AND 2ND LAYER BRAIDED WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
•
CONNECTION TYPE: THREADED EXTERNAL PIPE FIRST END
•
CROSS-SECTIONAL SHAPE STYLE: ROUND
TECHNICAL CHARACTERISTICS
MEASURING METHOD AND LENGTH138.000 INCHES NOMINAL OVERALL IN
TEMP RATING-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
MINIMUM INSIDE BENDING RADIUS9.500 INCHES IN
CONNECTION STYLEINVERTED FLARE FIRST END
END CONNECTION DESIGNSTRAIGHT FIRST END
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED WIRE AND 2ND LAYER BRAIDED WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
CONNECTION TYPETHREADED EXTERNAL PIPE FIRST END
CROSS-SECTIONAL SHAPE STYLEROUND
OUTSIDE DIAMETER1.190 INCHES MAXIMUM IN
OPERATING PRESSURE2250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
SUBSTITUTES & CROSS-REFERENCES 2
13230E3409Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
13230E3409-13Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy HR2T12-138?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HR2T12-138?
HR2T12-138 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace HR2T12-138?
There are 2 known substitutes for HR2T12-138: 13230E3409, 13230E3409-13. Substitute compatibility should be verified for your specific system.
What is the NSN for HR2T12-138?
HR2T12-138 is cataloged in the U.S. Government catalog under NSN 4720-01-416-3254. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HR2T12-138

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.