PartsTable
Technical Data Sheet
PartsTable / STORAGE_HDD / HR2000
HR2000 ✓ Verified by PartsTable
— · STORAGE_HDD · 3.5_SATA_HDD
WHAT YOU NEED TO KNOW
SAS backplane supports SATA, not vice versa NL-SAS = SAS protocol at nearline (7.2K) speed — NOT SATA
Gen8 LFF tray ≠ Gen10 tray — different screw holes
PRODUCT OVERVIEW

The LATHE,TURRET,HORIZONTAL is a the manufacturer industrial component. Key specifications include phase: SINGLE, drive_type: SDS PLUS, design_type: SCREW, rated_swing: 30.000 INCHES NOMINAL IN, unit_design: DESK TOP, current_type: AC. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 7025-01-395-6382, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
STORAGE_HDD→ 3.5_SATA_HDD→ HR2000
NSN: 7025-01-395-6382
FSC: 7025
CAGE: 54420 — DAGE-MTI, INC (USA)
SPECIFICATIONS
phaseSINGLE
drive_typeSDS PLUS
design_typeSCREW
rated_swing30.000 INCHES NOMINAL IN
unit_designDESK TOP
current_typeAC
drive_methodELECTRIC MOTOR
mounting_typeFLOOR
overall_length13.000 INCHES NOMINAL IN
voltage_rating115.000 VOLTS NOMINAL
frequency_rating60.0 HERTZ NOMINAL
performance_typeHEAVY DUTY
NSN7025-01-395-6382
COMPONENT DIAGRAM
RELEASE LATCH — NL-SAS 7.2K HR2000 OEM NL-SAS INTERFACE INTERPOSER SAS drive in SATA tray? Check board compatibility 3.5" (101.6 x 146mm) LFF 3.5" DRIVE | — | NL-SAS 7.2K NL-SAS uses SAS protocol at 7.2K RPM | SAS backplane supports SATA, not reverse Tray generation matters | Gen8 LFF tray differs from Gen10 TITLE LFF 3.5" DRIVE PN HR2000 MFR OEM
KEY FEATURES
•
UNIT DESIGN: DESK TOP
TECHNICAL CHARACTERISTICS (FLIS)
UNIT DESIGNDESK TOP
UNIT DESIGNDESK TOP
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
3416-0000-0000Interchangeable
interchangeable cross-reference
interchangeable
HR2000Interchangeable
interchangeable cross-reference
interchangeable
HR2000 MAKITAInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy HR2000?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HR2000?
HR2000 is a LATHE,TURRET,HORIZONTAL. It is classified as a STORAGE_HDD (3.5_SATA_HDD).
What parts can replace HR2000?
There are 3 known substitutes for HR2000: 3416-0000-0000, HR2000, HR2000 MAKITA. Substitute compatibility should be verified for your specific system.
What is the NSN for HR2000?
HR2000 is cataloged in the Federal Logistics Information System (FLIS) under NSN 7025-01-395-6382. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HR2000

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026