PartsTable
Technical Data Sheet
Download PDF

HPT111950 — COVER,PROTECTIVE,DUST AND MOISTU

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

HPT111950: COVER,PROTECTIVE,DUST AND MOISTU.

COVER,PROTECTIVE,DUST AND MOISTU. Key specifications include special_features: COLOR IS GREEN NO 383, supplementary_features: ITEM IS WEATHER RESISTANT AND WATERPROOF, end_item_identification: GENERATOR SET, DIESEL ENGINE, part_name_assigned_by_controlling_agency: TARP - SMART - T. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-539-8175, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HPT111950
NSN: 5340-01-539-8175
NIINs: 015398175, 015398177
FSC: 5340 — Hardware, Commercial
CAGE: 2H635 — D. C. HUMPHRYS CO. (USA)
SPECIFICATIONS
special_featuresCOLOR IS GREEN NO 383
supplementary_featuresITEM IS WEATHER RESISTANT AND WATERPROOF
end_item_identificationGENERATOR SET, DIESEL ENGINE
part_name_assigned_by_controlling_agencyTARP - SMART - T
NSN5340-01-539-8175
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: HPT111950 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SUPPLEMENTARY FEATURES: ITEM IS WEATHER RESISTANT AND WATERPROOF
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-PRF-20696, TY II, CL2 MIL STD 1ST MATERIAL RESPONSE AND MIL-PRF-20696, TY II, CL1 MIL STD 2ND MATERIAL RESPONSE AND V-T-285, TY I, CL2I FED STD 3RD MATERIAL RESPONSE AND MIL-W-4088, TY II, COLOR GREEN MIL STD 4TH MATERIAL RESPONSE AND MS-51929-2 MIL SPEC 5TH MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS
SUPPLEMENTARY FEATURESITEM IS WEATHER RESISTANT AND WATERPROOF
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-PRF-20696, TY II, CL2 MIL STD 1ST MATERIAL RESPONSE AND MIL-PRF-20696, TY II, CL1 MIL STD 2ND MATERIAL RESPONSE AND V-T-285, TY I, CL2I FED STD 3RD MATERIAL RESPONSE AND MIL-W-4088, TY II, COLOR GREEN MIL STD 4TH MATERIAL RESPONSE AND MS-51929-2 MIL SPEC 5TH MATERIAL RESPONSE
SPECIAL FEATURESCOLOR IS GREEN NO 383
PART NAME ASSIGNED BY CONTROLLING AGENCYTARP - SMART - T
END ITEM IDENTIFICATIONGENERATOR SET, DIESEL ENGINE
SUBSTITUTES & CROSS-REFERENCES 2
00X040234Reference document
Same NSN cross-reference
Reference document — Secondary reference
FFP-XTVCTG-MIL-FM-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy HPT111950?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HPT111950?
HPT111950 is a COVER,PROTECTIVE,DUST AND MOISTU.
What parts can replace HPT111950?
There are 2 known substitutes for HPT111950: 00X040234, FFP-XTVCTG-MIL-FM-1. Substitute compatibility should be verified for your specific system.
What is the NSN for HPT111950?
HPT111950 is cataloged in the U.S. Government catalog under NSN 5340-01-539-8175. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HPT111950