HP8-5 — FILTER,RADIO FREQUENCY INTERFERE

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

HP8-5: FILTER,RADIO FREQUENCY INTERFERE.

FILTER,RADIO FREQUENCY INTERFERE. Key specifications include material: STEEL COMP 303 OVERALL, end_style: 90 DEGREE PARALLEL, ring_style: STRAIGHT GAP, recess_angle: 100.0 DEGREES NOMINAL, usage_design: EXTERNAL, hole_diameter: 0.090 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5365-00-945-0238, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ HP8-5

NSN: 5365-00-945-0238
NIINs: 009450238, 010952111, 011240527, 013572235, 013846188
FSC: 5365 — Bushings, Rings, Shims, and Spacers
CAGE: 8V613 — THE BOEING COMPANY (USA)

SPECIFICATIONS

material	STEEL COMP 303 OVERALL
end_style	90 DEGREE PARALLEL
ring_style	STRAIGHT GAP
recess_angle	100.0 DEGREES NOMINAL
usage_design	EXTERNAL
hole_diameter	0.090 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
surface_finish	125.0 MICROINCHES RIGHT SIDE
hardness_rating	31.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MAXIMUM
inside_diameter	0.680 INCHES NOMINAL IN
recess_diameter	0.175 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
shoulder_height	0.020 INCHES MINIMUM AND 0.028 INCHES MAXIMUM IN
outside_diameter	0.310 INCHES MINIMUM AND 0.314 INCHES MAXIMUM IN
NSN	5365-00-945-0238

COMPONENT DIAGRAM

KEY FEATURES

•

SURFACE FINISH: 125.0 MICROINCHES RIGHT SIDE

•

OUTSIDE DIAMETER: 1.750 INCHES MINIMUM AND 1.751 INCHES MAXIMUM IN

•

HARDNESS RATING: 31.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MAXIMUM

•

INSIDE DIAMETER: 1.4996 INCHES MINIMUM AND 1.5001 INCHES MAXIMUM IN

•

SURFACE TREATMENT: CADMIUM

TECHNICAL CHARACTERISTICS

SURFACE FINISH	125.0 MICROINCHES RIGHT SIDE
SURFACE FINISH	125.0 MICROINCHES LARGEST OUTSIDE DIAMETER
SURFACE FINISH	125.0 MICROINCHES LEFT SIDE
SURFACE FINISH	125.0 MICROINCHES BORE
OUTSIDE DIAMETER	1.750 INCHES MINIMUM AND 1.751 INCHES MAXIMUM IN
HARDNESS RATING	31.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MAXIMUM
INSIDE DIAMETER	1.4996 INCHES MINIMUM AND 1.5001 INCHES MAXIMUM IN
SURFACE TREATMENT	CADMIUM
MATERIAL	STEEL

SUBSTITUTES & CROSS-REFERENCES 3

009450238-04246Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

AA-STD-1Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

369A1303Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy HP8-5?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is HP8-5?

HP8-5 is a FILTER,RADIO FREQUENCY INTERFERE. It is classified as a MRO (MRO_GENERAL).

What parts can replace HP8-5?

There are 3 known substitutes for HP8-5: 009450238-04246, AA-STD-1, 369A1303. Substitute compatibility should be verified for your specific system.

What is the NSN for HP8-5?

HP8-5 is cataloged in the U.S. Government catalog under NSN 5365-00-945-0238. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

HP8-5 — FILTER,RADIO FREQUENCY INTERFERE

Request a Quote — HP8-5