PartsTable
Technical Data Sheet
PartsTable / COMPONENT / HP799J24M
HP799J24M ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, hole_diameter: 0.375 INCHES NOMINAL IN, outside_diameter: 0.688 INCHES NOMINAL IN, style_designator: SPLIT HELICAL-RIGHT HAND, surface_treatment: PASSIVATE OVERALL, material_thickness: 0.094 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-584-5446, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HP799J24M
NSN: 5310-00-584-5446
FSC: 5310
CAGE: 06845 — RAYTHEON COMPANY DBA RAYTHEON CO (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
hole_diameter0.375 INCHES NOMINAL IN
outside_diameter0.688 INCHES NOMINAL IN
style_designatorSPLIT HELICAL-RIGHT HAND
surface_treatmentPASSIVATE OVERALL
material_thickness0.094 INCHES NOMINAL IN
NSN5310-00-584-5446
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: HP799J24M · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
OUTSIDE DIAMETER: 0.688 INCHES NOMINAL IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
HOLE DIAMETER: 0.375 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.094 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
MATERIALSTEEL CORROSION RESISTING OVERALL
OUTSIDE DIAMETER0.688 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE OVERALL
HOLE DIAMETER0.375 INCHES NOMINAL IN
MATERIAL THICKNESS0.094 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
N406P13Interchangeable
interchangeable cross-reference
interchangeable
EA38Interchangeable
interchangeable cross-reference
interchangeable
5808685-3Interchangeable
interchangeable cross-reference
interchangeable
AN935C616Interchangeable
Same NIIN cross-reference
interchangeable
LSLC37XInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy HP799J24M?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HP799J24M?
HP799J24M is a WASHER,LOCK.
What parts can replace HP799J24M?
There are 5 known substitutes for HP799J24M: N406P13, EA38, 5808685-3 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for HP799J24M?
HP799J24M is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-584-5446. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HP799J24M

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026