PartsTable
Technical Data Sheet
Download PDF

HP7747-4-17 — BOLT,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

HP7747-4-17: BOLT,CLOSE TOLERANCE.

The BOLT,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL COMP XM-13 OVERALL, head_style: SPLINE DRIVE SHEAR HEAD, grip_length: 1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN, head_height: 0.164 INCHES NOMINAL IN, thread_class: 3A A, grip_diameter: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5306-01-129-0577, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HP7747-4-17
NSN: 5306-01-129-0577
FSC: 5306 — Bolts
CAGE: 0ZC92 — HEARTLAND PRECISION FASTENERS INC (USA)
SPECIFICATIONS
materialSTEEL COMP XM-13 OVERALL
head_styleSPLINE DRIVE SHEAR HEAD
grip_length1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN
head_height0.164 INCHES NOMINAL IN
thread_class3A A
grip_diameter0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
thread_length0.371 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
fastener_length1.443 INCHES MINIMUM AND 1.490 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
head_minor_diameter0.448 INCHES MINIMUM AND 0.455 INCHES MAXIMUM IN
nominal_thread_diameter0.250 INCHES IN
NSN5306-01-129-0577
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: HP7747-4-17 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.164 INCHES NOMINAL IN
•
FASTENER LENGTH: 1.443 INCHES MINIMUM AND 1.490 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.371 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: SPLINE DRIVE SHEAR HEAD
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.164 INCHES NOMINAL IN
FASTENER LENGTH1.443 INCHES MINIMUM AND 1.490 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.371 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLESPLINE DRIVE SHEAR HEAD
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN
HEAD MINOR DIAMETER0.448 INCHES MINIMUM AND 0.455 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 7
MB155-4-17Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
10115795Reference document
Same NSN cross-reference
Reference document — Informative reference only
ST3M747-4-17Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
S397-4-17Reference document
Same NSN cross-reference
Reference document — Secondary reference
VS3191-4-17Reference document
Same NSN cross-reference
Reference document — Secondary reference
122896-4-17Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy HP7747-4-17?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HP7747-4-17?
HP7747-4-17 is a BOLT,CLOSE TOLERANCE.
What parts can replace HP7747-4-17?
There are 7 known substitutes for HP7747-4-17: MB155-4-17, 10115795, ST3M747-4-17 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for HP7747-4-17?
HP7747-4-17 is cataloged in the U.S. Government catalog under NSN 5306-01-129-0577. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HP7747-4-17

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.