PartsTable
Technical Data Sheet
Download PDF

HP712107 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

HP712107: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 416 OVERALL, hole_diameter: 0.125 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN, special_features: ADDITIONAL SECURING PIN HOLE DIAMETER 0.145 IN. MIN.,0.150 IN.

MAX. IN, metallic_hardness_rating: 39.0 MINIMUM ROCKWELL C AND 45.0 MAXIMUM ROCKWELL C, securing_pin_hole_diameter: 0.126 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN, material_document_and_classification: QQ-S-763,416,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-286-2139, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HP712107
NSN: 5340-00-286-2139
FSC: 5340 — Hardware, Commercial
CAGE: 70236 — TACTAIR FLUID CONTROLS INC (USA)
SPECIFICATIONS
materialSTEEL COMP 416 OVERALL
hole_diameter0.125 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN
special_featuresADDITIONAL SECURING PIN HOLE DIAMETER 0.145 IN. MIN.,0.150 IN. MAX. IN
metallic_hardness_rating39.0 MINIMUM ROCKWELL C AND 45.0 MAXIMUM ROCKWELL C
securing_pin_hole_diameter0.126 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN
material_document_and_classificationQQ-S-763,416,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
distance_from_center_of_securing_pin_hole_to_rod_end0.135 INCHES MINIMUM AND 0.145 INCHES MAXIMUM IN
NSN5340-00-286-2139
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: HP712107 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECURING PIN HOLE DIAMETER: 0.126 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,416,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL COMP 416 OVERALL
•
DISTANCE FROM CENTER OF SECURING PIN HOLE TO ROD END: 0.135 INCHES MINIMUM AND 0.145 INCHES MAXIMUM IN
•
METALLIC HARDNESS RATING: 39.0 MINIMUM ROCKWELL C AND 45.0 MAXIMUM ROCKWELL C
•
HOLE DIAMETER: 0.125 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SECURING PIN HOLE DIAMETER0.126 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763,416,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SPECIAL FEATURESADDITIONAL SECURING PIN HOLE DIAMETER 0.145 IN. MIN.,0.150 IN. MAX. IN
MATERIALSTEEL COMP 416 OVERALL
DISTANCE FROM CENTER OF SECURING PIN HOLE TO ROD END0.135 INCHES MINIMUM AND 0.145 INCHES MAXIMUM IN
METALLIC HARDNESS RATING39.0 MINIMUM ROCKWELL C AND 45.0 MAXIMUM ROCKWELL C
HOLE DIAMETER0.125 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy HP712107?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HP712107?
HP712107 is a CLEVIS,ROD END.
What is the NSN for HP712107?
HP712107 is cataloged in the U.S. Government catalog under NSN 5340-00-286-2139. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HP712107

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.