PartsTable
Technical Data Sheet
PartsTable / COMPONENT / HP6N
HP6N ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.173 INCHES NOMINAL IN, material: PLASTIC POLYAMIDE NYLON BAND, overall_width: 0.380 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.045 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-964-2555, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HP6N
NSN: 5340-00-964-2555
FSC: 5340
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
diameter0.173 INCHES NOMINAL IN
materialPLASTIC POLYAMIDE NYLON BAND
overall_width0.380 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.045 INCHES NOMINAL IN
loop_inside_diameter0.330 INCHES NOMINAL IN
material_document_and_classificationZYTEL 101,E I DUPONT DE NEMOURS AND CO INC MFR REF SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.690 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.500 INCHES NOMINAL IN
NSN5340-00-964-2555
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: HP6N MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PLASTIC POLYHEXAMETHYLENE AMIDE BAND
•
LOOP INSIDE DIAMETER: 0.375 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.440 INCHES MINIMUM AND 0.560 INCHES MAXIMUM IN
•
DIAMETER: 0.167 INCHES MINIMUM AND 0.177 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.680 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-M-20693 TY 1 MIL SPEC SINGLE MATERIAL RESPONSE BAND
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALPLASTIC POLYHEXAMETHYLENE AMIDE BAND
LOOP INSIDE DIAMETER0.375 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.440 INCHES MINIMUM AND 0.560 INCHES MAXIMUM IN
DIAMETER0.167 INCHES MINIMUM AND 0.177 INCHES MAXIMUM IN
OVERALL WIDTH0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.680 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-M-20693 TY 1 MIL SPEC SINGLE MATERIAL RESPONSE BAND
TONGUE HOLE TYPEROUND, UNTHREADED
MATERIAL THICKNESS0.035 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
STYLE DESIGNATORSINGLE LOOP
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
190164-5Upgraded Successor
successor cross-reference
successor
711625-46Upgraded Successor
successor cross-reference
successor
15377-3970DUpgraded Successor
successor cross-reference
successor
094406-0000Upgraded Successor
successor cross-reference
successor
57A5A182-5Upgraded Successor
successor cross-reference
successor
NAS1397-P5NUpgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy HP6N?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HP6N?
HP6N is a CLAMP,LOOP.
What parts can replace HP6N?
There are 32 known substitutes for HP6N: 190164-5, 711625-46, 15377-3970D and 29 more. Substitute compatibility should be verified for your specific system.
Is HP6N still available?
HP6N is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HP6N

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026