PartsTable
Technical Data Sheet
PartsTable / COMPONENT / HP3NG1
HP3NG1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.163 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN, material: PLASTIC POLYAMIDE NYLON BAND, overall_width: 0.375 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.035 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-860-6426, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HP3NG1
NSN: 5340-00-860-6426
FSC: 5340
CAGE: 09922 — SOURIAU USA, INC. DBA SOURIAU USA INC (USA)
SPECIFICATIONS
diameter0.163 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN
materialPLASTIC POLYAMIDE NYLON BAND
overall_width0.375 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.035 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
loop_inside_diameter0.170 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
distance_from_loop_center_to_tongue_end0.563 INCHES MINIMUM AND 0.626 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole0.375 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
NSN5340-00-860-6426
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: HP3NG1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL: PLASTIC POLYAMIDE NYLON BAND
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.563 INCHES MINIMUM AND 0.626 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.375 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.035 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
•
LOOP INSIDE DIAMETER: 0.170 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
DIAMETER: 0.163 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSINGLE LOOP
MATERIALPLASTIC POLYAMIDE NYLON BAND
OVERALL WIDTH0.375 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.563 INCHES MINIMUM AND 0.626 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.375 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
MATERIAL THICKNESS0.035 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
LOOP INSIDE DIAMETER0.170 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
DIAMETER0.163 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN
TONGUE HOLE TYPEROUND, UNTHREADED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
182Upgraded Successor
successor cross-reference
successor
1530475-3Interchangeable
Same NIIN cross-reference
interchangeable
1/8-2Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy HP3NG1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HP3NG1?
HP3NG1 is a CLAMP,LOOP.
What parts can replace HP3NG1?
There are 3 known substitutes for HP3NG1: 182, 1530475-3, 1/8-2. Substitute compatibility should be verified for your specific system.
What is the NSN for HP3NG1?
HP3NG1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-860-6426. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HP3NG1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026