PartsTable
Technical Data Sheet
Download PDF

HP1060109-1 — SEAT,HELICAL COMPRESSION SPRING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

HP1060109-1: SEAT,HELICAL COMPRESSION SPRING.

SEAT,HELICAL COMPRESSION SPRING. Key specifications include material: STEEL COMP 416, design_type: SOLID, end_diameter: 0.6200 INCHES NOMINAL IN, bore_diameter: 0.4800 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN, overall_height: 0.6300 INCHES NOMINAL IN, special_features: 1.062-12UN-3A THD ON FIRST STEP 0.D A. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-182-5569, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HP1060109-1
NSN: 5340-00-182-5569
FSC: 5340 — Hardware, Commercial
CAGE: 70236 — TACTAIR FLUID CONTROLS INC (USA)
SPECIFICATIONS
materialSTEEL COMP 416
design_typeSOLID
end_diameter0.6200 INCHES NOMINAL IN
bore_diameter0.4800 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
overall_height0.6300 INCHES NOMINAL IN
special_features1.062-12UN-3A THD ON FIRST STEP 0.D A
style_designatorSEAT
surface_treatmentPASSIVATE
first_step_diameter1.2500 INCHES NOMINAL IN
distance_from_end_to_first_step0.2500 INCHES NOMINAL IN
material_document_and_classificationQQ-S-764,TYPE 416 FED SPEC SINGLE MATERIAL RESPONSE
NSN5340-00-182-5569
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: HP1060109-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST STEP DIAMETER: 1.2500 INCHES NOMINAL IN
•
END DIAMETER: 0.6200 INCHES NOMINAL IN
•
DISTANCE FROM END TO FIRST STEP: 0.2500 INCHES NOMINAL IN
•
DESIGN TYPE: SOLID
•
STYLE DESIGNATOR: SEAT
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-764,TYPE 416 FED SPEC SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.6300 INCHES NOMINAL IN
FIRST STEP DIAMETER1.2500 INCHES NOMINAL IN
END DIAMETER0.6200 INCHES NOMINAL IN
DISTANCE FROM END TO FIRST STEP0.2500 INCHES NOMINAL IN
DESIGN TYPESOLID
STYLE DESIGNATORSEAT
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-764,TYPE 416 FED SPEC SINGLE MATERIAL RESPONSE
SPECIAL FEATURES1.062-12UN-3A THD ON FIRST STEP 0.D A
SURFACE TREATMENTPASSIVATE
BORE DIAMETER0.4800 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy HP1060109-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HP1060109-1?
HP1060109-1 is a SEAT,HELICAL COMPRESSION SPRING.
What is the NSN for HP1060109-1?
HP1060109-1 is cataloged in the U.S. Government catalog under NSN 5340-00-182-5569. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HP1060109-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.